SPECDTUNING is proudly recognized as pioneers in the automotive industry for products and service. Our main goal is to provide the highest quality products a…
SPECDTUNING is proudly recognized as pioneers in the automotive industry for products and service. Our main goal is to provide the highest quality products a…
You must be logged in to post a comment.
if you splice into a acc power the foglights will always be on when the car is on unless you wire it a different way like into your daytime running lights or parking lights.
When he splices into the battery power and acc power is it so the fogs are always on when the car Is on? Does he have the option to have just the headlights on?
I believe they cut a hole somewhere near the foot well.
Where was the hole that you ran through??
Yes some wires were ran through the firewall
Did you run wires through the firewall?
Thank you!
I just got my fog lights for my 02 RSX and I was gonna try to install them myself but after watching this video I’m scared I’ll fuck up lol it was very helpful, though. Thank you guys. Great video.
The installation should be the about the same some placement for wires might be a little different.
How about for 2005-2006??
Well if your car still shows you how hot it is outside then you have one somewhere maybe just not in that spot.
Im missing the sensor in 7:29, is that bad? What part number is it?
Should almost be the same except for some wiring and bolt placement.
looking for a tutorial on 06 rsx
@ Specdtuninginfo
when you connected the 1 pin connector to the fog light was there already one in the car or did you have to feed it through
yes you can but you would need to use electrical tape.
awesome Thank you!
thanks alot just did the foglight installation on my girls 06 rsx it differs a little but take a little common sense came out great look great thanks for the tips helped alot great video.
Can you please contact our customer service team with the photo of the “6 pin connector” they will be happy to help you out.
I have a harness with a 6 pin connector where does that go. any help please
In the previous step you should have found the ACC power and the battery power wires with the test light, and those are the wires you would need to splice into with the quick connectors.
what just happened at 11:58 im so confused now ive been here 4 h hours installing them everythingvis perfect till 11:58
Nope sorry we do not.
Are there any pictures or videos of the beam pattern of these fog lights?
Sorry i wouldnt know the answer to that question.
These lights should be compatible with Canadian RSX’s with DRL’s and heated mirrors/seats, yes? Trying to install American OEM fogs will disable the DRL’s and heated features because of the harness.
Yes you can put HID’s into it. You will have to buy the HID kit if you dont have one.
hi, i just got these for Christmas! I was wondering if HIDs would work fine with these fogs? Also will I have to purchase anything extra? Thanks!
No it does not
does wiring this way turn the fogs off when the high beams are on? that’s how the oem fogs are wired
We are not sure of the color codes of the wire, so we recommend that you still use either a volt meter or test light to find suitable wires to tap into.
We are not sure of the color codes of the wire, so we recommend that you still use either a volt meter or test light to find suitable wires to tap into.
What color wire connect to the all white, and the green under the sterring wheep
The white wire around 14 gauge and the red one is around 18.
What is the color of the ACC wire that is spliced into? White w/red or black w/red? Does it matter which one I us?
What size quick connectors are used to splice into ignition harness?
you can find the size of your bulbs in your owners manual. unless you got a headlight product from us, the size for our lights (projectors) are H1 and your stocks should be H1 as well
Ok then thanks, im sure thats what happened. How do you know the size of the bulbs? sorry im not so smart with this stuff hah
if your car is still running, then you might want to check your bulbs.. u probably burnt them out when you left it on
both headlights stopped working in my car , i think i might have forgot to turn them off once . do i needa replace the bulbs or can it be something else?
Are those type r healdights ?
Using the test light….how do you know if its the Battery power wire and ACC power wire? Will those 2 just light up because they have the presence of an electric voltage?
where can you obtain the quick connectors?
Ur guys videos are very help
now do one for 2003 civic please!!!