question.. I have a 90′ ls auto Integra. I replaced my driver side axle a
few months ago because it was knocking. Just a few days ago it started
making almost the same exact noise. It’s not a constant knock tho it’s just
sparatic. What could that be??
If my car doesnt have the abs lock woukd the abs axles fit on to my car i
have a 1990 integra ls that needs new axles and i also have a 1992 integra
gsr that has axle warranty but has abs would the 92 axles fit to the 1990
integra.
@hermetkrab With a 1/4″ gap, It sounds like you did not seat the Axle all
the way, you need to push it hella hard, almost slam it into place to seat
the ring on the end. If you have done that it is most likely the wrong
axle.
great video dude, Im having the problem of my passenger side axle refusing
to go back into transmission. There is a 1/4th inch gap where axle connects
into transmission. Resulting the car to now go anywhere. Any input would be
helpful man
This video fucking rocks!! Thanks!!! It’s helping me out a lot, almost done
with the driver side; Im guessing the passenger side shouldn’t be to hard..
:/
Is there a tool that I can use to remove the clip closest to the
transmission…. or do I just pop it out with a screwdriver.. my concern is
losing any clips or retainers. call soon it looks way too easy had you
already take it apart and put it back together loosely….? Come on come on
don’t lie to me…lol?
i have pushed them in but i think they might just be to short you see i
have a 1.7 tranny and a 1.8 engine but they just pop out from the boot so
im just thinking they are just to short
simple quick realistic tutorial thx
Your axle seemed new haha also…I have the name yellow screwdriverr
did you remove your heat shield?
Is.it the same on a 92civic hatchbak
freaking awesome video keep it up man
i cant loosen up my bolt i broke like 3 ratchets. what do you suggest?
thanks??
question.. I have a 90′ ls auto Integra. I replaced my driver side axle a
few months ago because it was knocking. Just a few days ago it started
making almost the same exact noise. It’s not a constant knock tho it’s just
sparatic. What could that be??
awesome! doing it soon. great instruction.
Thanks
@TaLoCc they look exploded..ill change them and see the difference. but
thanks a lot man i appreciate it.
If my car doesnt have the abs lock woukd the abs axles fit on to my car i
have a 1990 integra ls that needs new axles and i also have a 1992 integra
gsr that has axle warranty but has abs would the 92 axles fit to the 1990
integra.
No GSR axle’s will not fit
the car would shake at any speed under accretion if the cv was bad.
No it’s the same.
good stuff bro
@hermetkrab With a 1/4″ gap, It sounds like you did not seat the Axle all
the way, you need to push it hella hard, almost slam it into place to seat
the ring on the end. If you have done that it is most likely the wrong
axle.
great video dude, Im having the problem of my passenger side axle refusing
to go back into transmission. There is a 1/4th inch gap where axle connects
into transmission. Resulting the car to now go anywhere. Any input would be
helpful man
This video fucking rocks!! Thanks!!! It’s helping me out a lot, almost done
with the driver side; Im guessing the passenger side shouldn’t be to hard..
:/
thx alot man really saved me some money,,
like a boss
Are there any torque specs I need to know for putting back on everything?
Jack it up on one side, the fluid drains to the opposing side. No need to.
The fluid WILL NOT drain out when changing your axle. In this video the car
is jacked up equally on both sides.
Is there a tool that I can use to remove the clip closest to the
transmission…. or do I just pop it out with a screwdriver.. my concern is
losing any clips or retainers. call soon it looks way too easy had you
already take it apart and put it back together loosely….? Come on come on
don’t lie to me…lol?
The clip is attached to the axle it’s not going to fall off.
you dont have to take the fork out, the axel slips thru the fork
Yes about the same as a Prelude. 17″ Drag DR-9
I use Ryobe 18 volt electric power tools.
Do you know if I do the same to my 90integra?
It’s the same car.
One quick question on my 190 integra the driver side doesnt have abs and on
my passenger side does have abs lock on. Is yours like that too
i have pushed them in but i think they might just be to short you see i
have a 1.7 tranny and a 1.8 engine but they just pop out from the boot so
im just thinking they are just to short
Thank you for posting excellent video
I’m doing my transaxle on the passenger side. Do I need to know anything
different.