DIY: Starter motor for 2010 Acura RDX turbo
Time to do this job is 40min or less, depending if you have the right tools.
Starter was purchase at Advance Auto, brand is carquest.
Tools used in video:
Impact ratchet
1/2 ratchet
3/8 ratchet
10mm socket
12mm socket
14mm socket
17mm socket
Small pliers
UPDATE: 04-28–21
So that squealing noise and grinding was coming from the new starter.
I’ve returned it and got a different brand, I’ve paid a little bit more for it.
But it worked out much better than the carquest brand.
Remanufacture Premium Starter:
ST-1048 (17953)
WWW.or plus.com
Disclaimer:
“Sokhom Garage” Will take no responsibility for any damages, injuries, losses or liabilities associated with performance on your vehicles or others property, you do this at your own risk, my video is for guidance, and educational/informational purposes. As always be safe and wear ppe (personal protection equipment)
#Acura #RDX #honda #starter #Cars #Garage #DIY #Turbo
){kind=link}
Help.me.change mine pls
Great video and camera work!
Man, I like your socket wrench. I must get that setup of tools before I do this. Thanks!
Which one is better denso or carquest
Which one is denso or carquest
How did this starter turned out I mean did it last for a awhile
Great videography. I can see everything.
Thanks very much for this video! very helpful
Bro what kind of drl light are you using ?
I have done everything in the video and the starter won't come out. Help??