Having problems starting when cold? This is how to replace glow plugs on 1.6HDi (Peugeot, Citroen, Volvo, Mini, Mazda3, Suzuki, etc.) and TDCi (ford) diesel engines. The car is Peugeot Partner 2007 (~86,000 miles) model, same as a Citroen Berlingo. Original glow plugs in the car were Beru (8mm) with push-fit caps. The replacement were Bosch (same as these https://amzn.to/33vtHy2).
The view of the camera is from the top of the engine.
All my car-related purchases: https://www.amazon.co.uk/shop/moremolecules
An important amendment, it appears that copper grease may interact with the aluminium body of the engine. One could use lithium grease in that case, but I have not seen a problem with the copper grease.
#HDi #CarMaintenance #GlowPlugs
Disclaimer:
Use the information provided in this video at Your Own Risk. More molecules provides this video for informational purposes only and assumes no liability for any damage or loss incurred as a result of the use of the information or tools presented in this video. The information provided here may contain inaccuracies and more molecules cannot guarantee the correctness or reliability of the content.
As an Amazon Associate I earn from qualifying purchases. As such I have included affiliate links that may earn a small commission if you click through and make a purchase. I am an independent youtuber and I am in no way influenced by any advertiser or commercial initiative.
thanks a lot! Now it is clear how to pull the cups out. Ha, with no instruments!
I used work in ford and the guy was over us used all ways tell us take the car for a drive and get it up to operating temp and then remove glow plugs he said it makes it easier how true this is I don’t know
Excellent. Thank you for doing this vid. 🙂
I hope my plugs come out as easy as yours did. nice video man.
I had a 1351 code. All my glowplugs were dead. Took all the precautions to get them out in one piece. Due to the carbon build up of not burning and having a larger diameter at the end, all of them snapped off at the tip. No way getting them out without special tools. I made a guide to hammer the tips into the cylinders and then removed the injectors in order to get the tips out with a flexible magnet. This is quite a drama. You need a camera with light wich is not bigger than 7mm diameter in order to locate the tip. The magnethead should be no larger than 4mm in order to make the angle because the pistons have a highest point in the middle.
Does that torque wrench work anticlockwise (unscrew) as well as clockwise(screw)?
Hi. My cars is 263oookm and i never changed glow plugs or EGR valve. Maybe it is time soon to do this??–
Hello,
Can i ask why you heat the engine before? You recommend to change the plugs in a warm state??
Nice video!
FYI; If the engine was/is running lumpy and your Glow Plugs were fine, you have a problem with 1 or more Injectors that are leaking from the Nozzles.
It's very common.
Does the Anti Polution warning come on when it's cold starting?
hello sir Great job!!! this job was missing on youtube you sir have done it very well how many klm had the partner at the time.
Thanks for posting this. It's convinced me not to try it on my '07 Citroen C5, where there's very little space between the engine and the scuttle.
Ești meseriaș, eu am un volvo v50, același motor, m-ai ajutat cu bujiile. Mersi. Minutul 19:00 te-a dat de gol „imediat„
When it breaks , it break the tip of glow, but dont worry ! With an steel rod hammer tip in to the cilinder then take of injector and with an 6mm magnetic extractor u take tip from cilinder through injector hole! No need to take off cilinder head!!!
My car is ford fiesta mk7 don't have the priming bulb but if I buy one shale I just connect it to out let on filter and pump till I see some fuel
Thank you the reason I took the out let pipe of was to see if the fuel was coming out of filter as car won't start I no pump is working but if no fuel comes out it won't go to injectors to start car what do you think
Hi done my glow plugs today as this is same as 1.4dtci ford fiesta thank you so much ? Can you tell me on the fuel filter the out let at front that goes to injectors when you disconnect this ouoe and turn the engine over is fuel serpose to come out or not thanks
What I ment was the nut and bolt you took of at back of engine what did it release thanks happy new year to you