Build

2JZ Swap Nissan 240sx build BREAKDOWN!!

#2jz #240sx #180sx As promised here’s the full build breakdown on my 2jz project 240sx’!! Hopefully I answered all your guys questions!! If I missed any comment down below!! If you guys enjoyed the vid and would like to keep up with my new build don’t forget to LIKE & subscribe! Also follow me on […]

3,744
Like
Save
Turbo Widebody Integra Build Pt.1

Getting back to work on this dusty project that has been around for far too long. Danny’s turbo widebody DA Acura Integra is a time capsule of early 2000’s tuning culture which is slowly getting modernizing touches to make it an even more capable cruise night toy.

163
Like
Save
PART 5 of my cross-country Suzuki build
1,177,082
Like
Save
EP3 – TUNING TRACK PREP – 1973 SEMA Pontiac TransAm Indy car build

Horizon Motorsports works on putting together spares packages and tuning options for the track. With a car running Indy car suspension there is plenty to tune so we went to our reference book and organized all of the parts needed to be perfectly tuned for the track. We also give a brief overview of some […]

445
Like
Save
MAJOR Upgrades For My BUDGET BUILD Land Rover Disco I Project –  SUPERWINCH 12k Install!!

Thanks again to Westin/Superwinch for the hookup. See the links below for the products mentioned! Superwinch: https://www.westinautomotive.com/superwinch-sx-series-winches AUXBeam: https://auxbeam.com/collections/8-inch-led-driving-light/products/8-5-inch-220w-led-spot-driving-light-off-road-lights-with-white-drl-amber-turn-signal-light Thanks for watching! Please like and subscribe for the most Rover content on Youtube! Support the channel! Patreon link below. Patreon – https://patreon.com/AddictedMotors?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link

443
Like
Save
VINTAGE CAR RESTORATION/ Integrating a Buick Door into the Oldsmobile Cutlass Build

Welcome to our journey of restoring a classic 1971 Oldsmobile Cutlass! Join us as we tackle the challenges of rust repair and fabrication to breathe new life into this iconic vintage car. From welding to custom metalwork, we’ll show you the step-by-step process of bringing back the beauty and charm of this old-school ride. Stay […]

76
Like
Save
Ensuring Peak Performance: Complete Porsche 911 Engine Fuel System Inspection And Build

This week I tackle the fuel system on my Porsche 911. New fuel lines, clean fuel injectors, check all systems are tight and ready for first start. I’m still waiting on a few parts, but it doesn’t hurt to go slow and double check everything before installing this beautiful Porsche 911 engine. Thanks for watching […]

892
Like
Save
Honda CRF300L Rally Tower Build: Part 2  – Install

Part 1 Unboxing: https://youtu.be/44gJ4QlDw1g Part 3 Testing: In wintery Finland episode out next friday! In this part 2 we install the new Rally Tower / Navigation Tower for my Honda CRF300L. Next video will include test rides and testing those lights in the dark. Without forgetting comparisons to the stock setup of course so like […]

195
Like
Save
2008 Pontiac G6 fuel pump diagnosis….won't  build pressure to specs running or key on/engine off.

2008 Pontiac G6 fuel pump diagnosis….won’t build pressure to specs running or key on/engine off.

37
Like
Save
HYANKA 6×9 Speaker Review and Custom Rear Deck Build – Volvo 240

Adding more sound on a budget Like the video??? Click the link below too subscribe! https://www.youtube.com/channel/UCPtX_10IErGI2Ka-dluvopw?sub_confirmation=1 I’m installing two HYANKA 6×9 speakers on the back deck/package tray of our Volvo 240. I used a sheet of 1/4″ ABS and wrapped it with Ultra Flex black carpet. The H Yanka ES-69 speakers aren’t the best but […]

104
Like
Save
DIY Coilover setup on my Triangulated four link build, Jeep Wrangler TJ

In this video I finally follow up on my How to build a 4 link suspension, DIY triangulated four link build, Jeep Wrangler TJ video I put out back in February of 2020. We go back to some of the footage I have from setting up the Barnes4wd coil tower, and then I go over […]

49,236
Like
Save
Volvo 240 Racer – Rollcage Build – Part 2

Update time! 00:00 Intro 00:30 Why so long? 02:05 The rollcage 03:15 I messed up 06:40 The rust 07:46 Painting 10:31 Sideproject Doors 13:50 Sideproject Wireloom 15:40 Sideproject Headlights 17:15 Tjorven 22:19 The Lifted 240

70
Like
Save
PARTS PARTS PARTS!! GC8 TRACK CAR BUILD!!

#gc8 #subaru #trackcar #biggiejdm Greetings and salutations, we’re back with another instalment of our GC8 Track-car build. In this episode we install a bailey dump valve we won off ebay for 35 quid. We then go on the hunt for more parts and make new Subaru friends totally by accident. Remember to like, share and […]

249
Like
Save
Chevy 262 4.3L Build DID NOT GO AS PLANNED. Installing Cam Bearings and Camshaft

Hello and welcome back everyone. Today we install the cam bearings and camshaft in Tommy’s Chevy 262 4.3L. Unfortunately the build did not go as planned toward the end. #chevy #hotrod #sbc #cars #jdmcars #acuraintegra #b16 #b18 #b20 #junkyard #k20 #civic #eg #ek #kswap #automotive #mechanic #smallblockchevy #bigblockchevy #lm7 #ls1 #ls3 #lsx

71
Like
Save
15 YEAR OLDS FIRST CUSTOM GAMING PC BUILD! ($2000)

Parts List: https://pcpartpicker.com/list/TNLWPF #gamingsetup #gaming #pcgaming #gamergirl #gamerboy #pcbuild #pcedit #gamingvideos

241
Like
Save
Build the Volkswagen T1 Samba Camper Van, Issues 88, 89, 90, 91, and 92

Build the Volkswagen T1 Samba Camper Van Pack 19, Issues 88, 89, 90, 91, and 92 Order your Samba T1 VW Bus Kit now at: https://bit.ly/3M7i0Es Use Promo Code VABULLI This video details what’s included and the build process for Pack 18, Issues 83, 84, 85, 86, and 87 of your Build Your Own T1 […]

95
Like
Save
Suzuki TL1000S V-twin Build: Time for Assemble “The Widowmaker”
36
Like
Save
Dirt cheap OBS Chevy build!

Working on my 92 Chevy Silverado aka Trusty Rusty, major changes in store for this old obs Chevy, Lower, shorter and more power are in store for this build! #truck #broken #classiccars #chevyc10 #chevy #restoration

200
Like
Save
Lamborghini Countach LP400 Build : Mounting The Fuel Tanks

Lamborghini Countach LP400 Build : Mounting The Fuel Tanks If you would like to support the channel we have channel memberships on here or head over to https://www.buymeacoffee.com/thediytuners

388
Like
Save
Let’s build out a GMC interior ep. 7.  Cover you patters

The next step is finishing your panel after you fit it in actual position. These are basic procedures. Stay tuned for the next video to tie this one together with materials discussions and answers to your comments. Thanks for your support ….. stay tuned

252
Like
Save
ITS ON THE ROAD! COPART, PORSCHE CAYMAN S 987 SALVAGE REPAIR. DIY BUILD. EXHAUST, GOPRO, DRONE SHOTS

A little overdue, Apologies. Final summary video. Sorting the final pieces ready for mot and adding some modifications. Then putting some decent mileage on the car to check for any unforeseen issues and getting to know this awesome little car. Its a country road rocket

129
Like
Save
42 Chevy truck Rat Rod build. Can we fix the rear fender and running boards?

This Video shows me fighting the rear fender and running boards on my 42 Chevy Rat Rod truck build. Still new to metal work and figuring out ways to make this happen with what i got. RatRod ,metal finish, S10 frame swap, daily driver . not Hot Rod or Deathtrap

539
Like
Save
SUZUKI GS550 Cafe Racer Build [Part 5] – REMOVE COVERS, CLUTCH CABLE & CLEANING

In part 5 of my 1979 Suzuki GS550 Cafe Racer project, I remove the clutch adjustment & sprocket covers and clutch cable. In preparation for polishing, I degrease and clean both of the covers. Over the Christmas holidays, I’ve been looking at the styling of the bike. Taking some inspiration from my Dad’s Triton cafe […]

124
Like
Save
Suzuki Cappuccino Build PART 3! Shifter Rebuild Kit

Bye Bye Sloppy Shifter, Hello Nice & Tight Shifting. Not many mods you can do yourself for under $50 that make such a difference in everyday driving. SUPPORT THE PATREON ►► https://patreon.com/WayBeforeTheFame Subscribe here! ► https://www.youtube.com/Waybeforethefame Instagram ► https://www.instagram.com/WayBeforeTheFame SHOP 24/7 ► https://www.WayBeforeTheFame.com

615
Like
Save
Turbo Kei Truck Subaru Sambar 660cc DIY Build

Specs: 4 cyl 660cc clover 4 engine stock internals VZ21 turbo from ebay running 6-7psi Audi A3 intercooler Link Atom x ECU 43.5psi fuel regulator boost referenced 4x 170cc injectors Nissan March throttle body Yet to be dyno tuned but runs really well as is Like as Sub for more custom rare projects!

236
Like
Save
How To Rebuild a Pontiac Motor on a Budget – 1967 YT 400 Build Part 1

How To Rebuild a Pontiac Motor on a Budget – 1967 YT 400 Build Part 1 This is the first video in the series of building a Pontiac 400 motor for my 1967 Pontiac Firebird 400 Hardtop. Follow along as I rebuild an American Muscle Car Iron V8 motor by myself. ************************************************************************************ FREE ARROWHEAD GARAGE […]

4,925
Like
Save
How To Build a Pontiac 4 Barrel Carb Air Cleaner from a stock Buick Air Cleaner PART 1

How To Build a Pontiac 4 Barrel Carb Air Cleaner from a stock Buick Air Cleaner Trying to find an original Pontiac 4 barrel air intake is becoming harder and harder to find! Let Luis show you how to take a Buick air intake and modify it to look almost like a Pontiac air intake!!! […]

333
Like
Save
Building a Porsche 924 Safari: Build Update. #Lights #Interior

This is the thirty seveth video in a series where I will be documenting the build of my Porsche 924 Safari. In this episode I install a new headlining, door cards, quarter panels and show te repairs to the rust. I also tackle the installation of the fog and driving lights. For high quality used […]

423
Like
Save
How to Build Gasser on a Budget Episode #11 Engine Crossmember 62 Olds F 85 Maniac Marge

Welcome back to Racing LYFE, where we’re diving deep into the thrilling world of budget-friendly gasser transformations! In Episode 11, “The Maniac Marge Transformation,” Chris takes center stage once again to showcase his incredible custom fabrication skills. In this episode, Chris takes you on a captivating journey as he custom-builds an engine cross-member that is […]

1,469
Like
Save
PORSCHE RUNNING BOARDS INSTALL & REVIEW – DIY | EPISODE 3 | PORSCHE 958 CAYENNE BUILD SERIES

Well the time has come for me to A) get back into the brand and B) build a more practical, reliable daily driver. In the first episode of this series, I cover what I purchased, common things to look out for, how to research the build sheet for a Porsche, and my plans for the […]

95
Like
Save
How to Build A 450HP is300 on a BUDGET! #lexus #is300 #2jz #howto #trending

#budgetbuild #racecar #howto #supra #2jzgte #2jzge #coolcars #jdm

56,180
Like
Save
455 Olds Build
4,391
Like
Save
FULL BUILD – REBUILDING A CRASH DAMAGED PORSCHE CAYMAN S

I bought a wrecked Porsche Cayman S to rebuild!! But the build was a lot harder than i first thought! Here’s every single episode i filmed rebuilding the Porsche in one full video. Enjoy. ⬇️ FOR MY MAIN CHANNEL ⬇️ https://www.youtube.com/matarmstrongbmx ⬇️ FOR MECHANDISE ⬇️ https://matarmstrong.co.uk/

4,608,674
Like
Save