Nice video but for anyone wanting to attempt this job, it can be done
without removing the door from the car. 1. Remove door panel. 2. Drill out
the rivet for the window guide. 3. Remove the three screws holding the lock
in place. 4. Remove connector and linkages and manipulate door lock out
(move the window guide just enough to make room to remove the lock). 5.
Reverse.
){kind=link}
Nice video but for anyone wanting to attempt this job, it can be done
without removing the door from the car. 1. Remove door panel. 2. Drill out
the rivet for the window guide. 3. Remove the three screws holding the lock
in place. 4. Remove connector and linkages and manipulate door lock out
(move the window guide just enough to make room to remove the lock). 5.
Reverse.
How do you remove the revit? do you have to get a new one? Thanks.