Raise & support the vehicle safely according to Manufacturer Jacking & Supporting Positions!!! **** http://fkh161.ca/
Raise & support the vehicle safely according to Manufacturer Jacking & Supporting Positions!!! **** http://fkh161.ca/
You must be logged in to post a comment.
){kind=link}
Damn man what state do you work ? I just had to replace my wheel twice due
to.not replacing the bad cv shaft the first wheel bearing . Had to cut it
out ! Welded its self together
Hi, sorry about not having the hub installation in the video. I sometimes
forget to turn the camera on or the battery was dead. The bearing puller
that I used to remove the bearing, is used to install the hub into the
bearing. You basically squeeze the hub into the bearing. I’m pretty sure I
have a video that shows it… look for ABS Wheel Bearing. As for those
bolts for removing the hub, they came with the bearing puller kit. Thanks
for watching and taking the time to comment!
how much did you charge your customer for this?
Great work man thanks you gave me the best intel
Sorry, I don’t have access to billing… thanks for watching and taking the
time to comment!
Thank you, by any chance do you know the size of the bolts
What make? Brand Name?
Great video!!!! What bolts did you use to take off hub? And also after the
bearing is pressed in how do I get the hub on
For the A3 lug bolts, 12×1.5 thread/pitch and 80mm long.
Thanks for watching and taking the time to comment!
Good job, what bearing is that?