The last 20 secs are great to this video, I know that feeling of joy as you
‘Win’ lol. Informative as ever BMAC telling us what we need to know to do
the job. This job is very doable, with the tools needed probably costing
less than a garage bill.
Truly one of the most interesting and helpful vag channels on youtube. Keep
up the good work BMAC. You should start working on mk2’s and mk3’s aswell
:D
Pukka video m8, got a question my golf mk4 (AJM) seems to be a bit notchy
going from 1st to 2nd gear it’s more noticeable when turning corners when
changing upto 2nd gear, still unsure if it’s the clutch as it still spins
in 2nd gear easy, could it be a simple job or something like the gear
synchro! I know you can’t diagnose over the net but your opinion would be
really helpful hopefully.
thank you for your help..i have got a mk4 and i have to change the
flywheel.aswel ..i will do it myself,can you tell me some of the tricky
tools i will need,i havent got lots of tools but im thinking about buying
to do this job.once again thank you for your Videos…….
how many hours did it take you to complete the whole job ,I noticed you
only changed the clutch plate i seen videos on you tube stating changing
the duel mass can be a nightmare to do apparently.
Thank for making thiese vids they really help me out on my you my friend
have saved me lots of money. Keep up the good work!!! Ps I drive GTI, VR6,
2.8L, 2-DR., 6-SPD.
i wish i could work on cars were i live you can do simple stuff like add oil
or change a air filter, my apartment wont let me do any thing else
i bought brake pads and rotors and i have to get some else to do them
what a royal pain and the’s were i will leave it for now.
good luck on your car repair’s have nice day,
have you ever had any problems with the ECU flagging up a load of codes
that causes the car to go in to limp mode , touch wood its not a problem on
the car that i am driving but Apparent this an issue on some modals of
these cars and can happen without warning .i have watched all yours videos
and they are Great to watch thanks .
Great video. Those star drive driveshaft bolts can be a real pain to torque
up even with the correct tool. I replaced mine with cap head (Allen)screws.
Loving these videos ,but how can you tell if clutch is on its way-out now
you fitted a new clutch do you get any vibration on the clutch peddle
??????my 1.9 tdi with a ADT engine as done 78000 miles on a 2003 but i get
a vibration on the clutch pedal is it time to change the clutch in my car
????
7:42 reverse light switch?
I hope you enjoy the videos
+George Marris 6 speed.
+BMAC VAGS such a clean engine bay! Did you clean it yourself?
The last 20 secs are great to this video, I know that feeling of joy as you
‘Win’ lol. Informative as ever BMAC telling us what we need to know to do
the job. This job is very doable, with the tools needed probably costing
less than a garage bill.
what’s the name of the intro song. love it
Truly one of the most interesting and helpful vag channels on youtube. Keep
up the good work BMAC. You should start working on mk2’s and mk3’s aswell
:D
I d say clutch change is probably the most labor intensive jobs for the
car.
Pukka video m8, got a question my golf mk4 (AJM) seems to be a bit notchy
going from 1st to 2nd gear it’s more noticeable when turning corners when
changing upto 2nd gear, still unsure if it’s the clutch as it still spins
in 2nd gear easy, could it be a simple job or something like the gear
synchro! I know you can’t diagnose over the net but your opinion would be
really helpful hopefully.
thank you for your help..i have got a mk4 and i have to change the
flywheel.aswel ..i will do it myself,can you tell me some of the tricky
tools i will need,i havent got lots of tools but im thinking about buying
to do this job.once again thank you for your Videos…….
Is there any way you can make a video on doing a transmission fluid flush
or exchange on mk4s,
thankyou. keep up the good work :)
Did you have to bleed the clutch from the Slave cylinder after installing
new clutch?
how many hours did it take you to complete the whole job ,I noticed you
only changed the clutch plate i seen videos on you tube stating changing
the duel mass can be a nightmare to do apparently.
Thank for making thiese vids they really help me out on my you my friend
have saved me lots of money. Keep up the good work!!! Ps I drive GTI, VR6,
2.8L, 2-DR., 6-SPD.
i wish i could work on cars were i live you can do simple stuff like add oil
or change a air filter, my apartment wont let me do any thing else
i bought brake pads and rotors and i have to get some else to do them
what a royal pain and the’s were i will leave it for now.
good luck on your car repair’s have nice day,
I
Hi i have a 1,6 mk 4 akl,i have to replace clutch and pressure plate
tommorow.Will the procedure be similar as shown in this vid?
How much was the impact and what’s the battery life like
Nice vid, would love to have the gubbins to do all this. Got any of the
leds back in stock?
have you ever had any problems with the ECU flagging up a load of codes
that causes the car to go in to limp mode , touch wood its not a problem on
the car that i am driving but Apparent this an issue on some modals of
these cars and can happen without warning .i have watched all yours videos
and they are Great to watch thanks .
Was this a 5 speed or 6 speed?
Great video. Those star drive driveshaft bolts can be a real pain to torque
up even with the correct tool. I replaced mine with cap head (Allen)screws.
Can you write down the model of the impact gun you are using?
Thanks mate I will add you on fb when I get in from work, nice one
A video on bleeding the clutch would be great! Keep up the good work.
Im actually willing to do some of the stuff with my Golf Mk4 when i have a
second car 😀 Good videos as allways, keep up the good work
Those impact guns are worth their weight in gold! which one are you using
out of interest?
Love the laughter at the end! I know your frustration!!!
Loving these videos ,but how can you tell if clutch is on its way-out now
you fitted a new clutch do you get any vibration on the clutch peddle
??????my 1.9 tdi with a ADT engine as done 78000 miles on a 2003 but i get
a vibration on the clutch pedal is it time to change the clutch in my car
????