hiya mate, quick question, im getting my camshaft changed on my 1.9 tdi,
would you recommend injector seal replacement, whilst everything is out on
open?
well, didn’t find the tool but was talking to a mechanic who has a VW tdi
engine, so I’ve been at his garage today stripping bits out of that to put
into mine. Works ok(ish) now, got to get an air mass thingy, but also turns
out his spare engine’s injector is too powerful compared to my old ones, so
do I recon my old one, or replace ALL FOUR with the super speedy new
powerful ones? (or will that blow the engine up?) p.s. I watched it 10
times before doing the change, was a great help thanks. 🙂
Unfortunately not, but I took your advice and it is one of the Injectors.
Using your video to remove it would have worked this morning but there is
an engine part in the way… (the exhaust manifold? – the bit that goes
into the EGR valve from the front of the car..) So I’m off to Halfords so
they can sell me the right tool to get into that nook and remove that
particular bolt! 🙂
Hard to tell, it may need to go on to a computer to check the engine codes.
It could be egr valve, flywheel and lots of other things. Are you local to
London so we could look at it for you?
Clear and Concise! I’m thinkig I have to change a “wiring harness” for my
injectors to stop a stupid juddering problem I’ve got when going over 3000
revs (and the ESP light comes on), have you got a video for that please?
Hi Mate, great video. Is the replacement just as easy or does it take some
special equipment or proceedure ? Any chance you could post a video of the
replacement ? Thanks
Hi mate, what does PD mean? and if you were to replace these? Is It just
the reversal of taking them out? Or do you have to programme them? also I
looked at your website and I can’t see a online shop on it. Excellent video
by the way, I’ve always wondered about these injectors, and now I know.
Good work.
It means Pumpe duse. Yes i should have said it will be in my shop, still
building it at the moment. Than you for your email, I always appreciate
your comments.
good vid man more on vw diesels fair play
hello where are fuel lines?didn`t come with car?
keep going:)))))))))))))))))))))))))
Have you any video how mount and adjust the inyectors PD?
Is this the commonrail TDI ?
nice vid. where is the fuel suppy pipe for the injector?
Nice explaining of the job
hiya mate, quick question, im getting my camshaft changed on my 1.9 tdi,
would you recommend injector seal replacement, whilst everything is out on
open?
Thank you for your kind words.
Great work , keep going, VW POWER!!!!
Great video,thank you so much. I was searching how te remove them…
Hi great video, how do you check compression on the cylinders? i have a 17
piece compression gauge for diesel, would that work? Thanks
ok no problem, let me know how you get on.
well, didn’t find the tool but was talking to a mechanic who has a VW tdi
engine, so I’ve been at his garage today stripping bits out of that to put
into mine. Works ok(ish) now, got to get an air mass thingy, but also turns
out his spare engine’s injector is too powerful compared to my old ones, so
do I recon my old one, or replace ALL FOUR with the super speedy new
powerful ones? (or will that blow the engine up?) p.s. I watched it 10
times before doing the change, was a great help thanks. 🙂
Unfortunately not, but I took your advice and it is one of the Injectors.
Using your video to remove it would have worked this morning but there is
an engine part in the way… (the exhaust manifold? – the bit that goes
into the EGR valve from the front of the car..) So I’m off to Halfords so
they can sell me the right tool to get into that nook and remove that
particular bolt! 🙂
Hard to tell, it may need to go on to a computer to check the engine codes.
It could be egr valve, flywheel and lots of other things. Are you local to
London so we could look at it for you?
Clear and Concise! I’m thinkig I have to change a “wiring harness” for my
injectors to stop a stupid juddering problem I’ve got when going over 3000
revs (and the ESP light comes on), have you got a video for that please?
I have not got a car to replace them in a t the moment, sorry.
I appreciate the comment, thank you
Had to sign in to like the video! Nicely explained mate 🙂
Another great video.
Thanks man, I appreciate that 🙂
Hi Mate, great video. Is the replacement just as easy or does it take some
special equipment or proceedure ? Any chance you could post a video of the
replacement ? Thanks
Hi mate, what does PD mean? and if you were to replace these? Is It just
the reversal of taking them out? Or do you have to programme them? also I
looked at your website and I can’t see a online shop on it. Excellent video
by the way, I’ve always wondered about these injectors, and now I know.
Good work.
PD Pumpe Duse, it is the type of fuel system they use. You can google it
It means Pumpe duse. Yes i should have said it will be in my shop, still
building it at the moment. Than you for your email, I always appreciate
your comments.