VW Door Module Repair video, simple how to Video.
Buy your micro switch here http://shop.bmacvags.com/collections/electrical
How to Fix a VW Door Lock Module PERMANENTLY
39,696
Like
Save
){kind=link}
- Tags:
Door, Lock, module, permanently
- Categories: Volkswagen
Comments
Write a comment
You must be logged in to post a comment.
similar process for porsche
I stripped my unit and i got it to lock with central locking but when i try unlock it doesnt unlock. I can lock and unlock with key.. it would be great if i knew which position and placement i should put the piece connecting with motor in the right way should it have changed positions inside the module when i opened it .. they all fell out and i didnt see how they must go in
You mention the link on how to remove the panel and take out the lock, however it is not listed in the description as you say. Can you please double check your links or list it? I bought your microswitch and I am trying to install, would appreciate if I can follow the whole process. Thanks.
I have a golf mk5 that will not unlock from keyfob but will lock. Its four door. The key in drivers only unlocks drivers door, and if twisted to the right twice it still wont unlock the other doors. Does this sound like the fix in your video will cure it? If so does it mean I have four door lock actuators to remove to change the microswitch on each of them?
Thanks
James
Great job as usual! Aren't you supposed to align the bracket where the cable goes back to?
When you unsolder, consider using a 'solder wick" (braided copper ribbon) or a "solder sucker" which is a spring loaded plunger which creates a vacuum to suck up the solder. Also remember that solder flows toward a hotter area.
Hi. I've seen you are sold out on microswitches. When will they be available?
Very helpful video, thank you Obama!
Hey brother all your Vs are great and i hope that you can help me on this:
i have a VW passat 2008 TSI and my rear left door has the below issue:
1- the door is not locking or unlocking from the car or the key
2- the windows is not going up or down using the key by holding or from the switch in the driver door or the switch from the door it self
3- the car will not horn when locking from the key even before the problem happen or start to happen
4- i took all the wires from the door tested them and all are working,
5- i cleaned the connectors
6- non of the fuses are blown tested all
brother please help me i got crazy of this more than 5 months now
we hope we will have smart people like you in my country
exlente video.gracias
you could also melt the plastic holders from the micro switch, instead of use super glue. Just push the hot soldering iron in the middle of the pins and they will ex
@bmac vags
I just replaced my latch assembly. Interested in the core?
Please help me
hi thanks for the video I have a problem with my 2001 jetta were the key remote doesnt work for locking and unlocking and also wen I unlock the drivers door amd open it the door switch does not deactivate the alarm light on the door still flashes. when I put the key in the ignition then the alarm deactivates.
how to open a 2004 rear door lock manually for a VW 2004 Toureg
Very cool! However, do you know how to repair the Jetta MK 6 door lock? The driver's lock now only locks or unlocks by the key.
it can send to Argentina ?
Good video! I have a question. I changed the left front door lock module microswitch. After replacing everything the door light works well and the lightpuzzer also. The problem is that the door won't lock. What is wrong now?
Holy too much solder, batman… A lot of people just beef up the cracked solder joints and this solves their problem without having to change the micro switch. If that doesn't work, then I'd say replace it.
is the module same as whats in the audi tt,mine seems to point to it being the micro switch also.does have to be removed to clean or can it be done in situe.
First of all, use less solder, it will produce a cold solder because of the mass. Second, replace or at least check the other microswitches. Mine where dead and that was the problem with the alarm, so i open them up, clean them with some alcohol and voila, there back to life. I can make a video with 3 door modules i bought, all with the same problem.
Brilliant Channel and I agree with maicolloco69! TOP SHELF BRO!!! I have a different door lock situation; the door handles work however from time-to-time I have to pull then really slowly 2 or 3 time before the door latch will engage and then open. 03 Jetta Wolfsburg.
THIS GUY IS FANTASTIC THANK YOU FOR ALL YOUR CLIPS KEEP UP WITH YOUR GOOD WORK