USP Cast Aluminium Water Pump Kit for TSI (All hardware/fluids): http://bit.ly/2NxxVkj
No more plastic water pumps, no more water pump leaks. Replace your water pump once and for all! That factory plastic pump is no match for our cast aluminum, patent-pending replacement. Let this be the last water pump replacement you do.
On most TSI vehicles, the constant heating and cooling flowing through the water pump, causes the factory plastic pump to give out and crack. This crack leads to major leaks and immediate overheating problems. The repair and replacement of a new plastic factory pump could cost you well over $1000, which will ultimately leak once again many miles down the road. The USP Motorsports Cast Aluminum Water Pump is built to last. No cracking, no leaks!
Engine fitment includes CCTA, CAEB, CCTA, CETA
Vehicle Fitment:
Audi A3 8P – 2.0T (2008-2013)
Audi A4 B8/B8.5 – 2.0T (2009-2016)
Audi A5 B8/B8.5 – 2.0T (2010-2017)
Audi A6 C7 – 2.0T (2012-2015)
Audi Q3 – 2.0T (2015-2017)
Audi Q5 – 2.0T (2011-2017)
Audi TT MK2 – 2.0T (2009-2015)
Audi Allroad – B8/B8.5 – 2.0T (2013-2016)
Volkswagen Beetle – 2.0 (2012-2013)
Volkswagen CC – 2.0T (2009-2017)
Volkswagen EOS – 2.0T (2009-2016)
Volkswagen GTI MK5/MK6 – 2.0T (2008-2014)
Volkswagen Golf MK6 – 2.0T (2013)
Volkswagen Jetta MK5/MK6 – 2.0T (2008-2013)
Volkswagen Passat B6 – 2.0T (2008-2010)
Volkswagen Tiguan – 2.0T (2009-2017)
—
Shop online @ http://www.uspmotorsports.com for all Volkswagen, Audi, BMW, Mclaren, Lamborghini, and Porsche products!
—-
#Waterpump #USPMotorsports #DIY #VW #Audi #TSI
Find us on:
• Facebook – http://on.fb.me/1TPzRQm
• Instagram – http://bit.ly/1FDkgIG
){kind=link}
Would this fit a 2015 VW golf tsi ? 1.4l turbo ??
CAN YOU GUYS MAKE ONE FOR CBFA MOTORS PLEASE IT HAS AN EXTRA SENSOR if not please make the flange that fits the metal one for us with the sensor in it
After market tdi 1.8 golf water pump
Please make one for the MK7 7.5 please
Is there a cbfa version?
Make one for the mk7. I'm on my 3rd plastic one.
I see this video came out a long time ago. Have you made one for the GEN 3 engines yet? I need one right now!!! Thank you
work on cdaa ? motor ?
When are we getting a mk7 ea888 gen 3 water pump upgrade?
Need one for mk7s
@USP and/or anyone that can answer these questions:
1) Are the torque settings the same for these units over the OEM plastic ones or are they different given housing materials?
2) Does your kit come with the gaskets and are those recommended over using OEM ones?
Both of these questions are based on stuff I have read on forums about these aftermarket aluminum units (From various manufacture and retailers tbh) are prone to failures or leaking shortly after installs–but possibly due to metal material not mating up tightly to the block. Any thoughts/experiences? I have my engine coming out for a top end build and figure this is the time to replace the pump and other coolant fittings while engine is out and drained.
The only problem I've heard from owners is the water pump, this upgrade puts it in Civic territory and reliability imo
2nd one I've installed on my car now and it is leaking AGAIN
Will these pumps on MK7 2017 TSI 1.8L.
Where is this made, I have previously tried a China made aluminum water pump and it was garbage,ended up just getting a factory water pump from Audi dealership. Hope this is not making the same cheap mistake.