Trail Gear Hi Steer Kit on Amazon: https://amzn.to/38fO6fd
IFS Steering Box Frame Mount plates: https://amzn.to/3ruIOUM
Here’s some old footage from when I installed a Trail Gear Hi-Steer kit on my 1985 Toyota Pickup 4WD. I included a little bit of Wellsville off-roading toward the end of the video.
I don’t have Patreon or ask for donations but you can support the channel with some rad gear from my store: http://6thgeargarage.net/merchandise/
Follow Us:
Instagram: 6th_gear
facebook.com/6thGearGarage
){kind=link}
I really appreciate all this. Could you mention in one of your future videos what precautions one needs to make before welding on a vehicle? Thanks for all the info you share, and let's keep as many of these 22R/RE beasts on the road as possible!
It's called toe in. Not out.
Great video thank you
Can I hire you to help me install ??
What do I do if my dash just toast and I don want to glue crap and don't want to cut and patch the old dash?
Nice pretty cool .. i really wish i knew more about cars
You appear to missing the spacer on the leaf spring mount driver side. Your truck probably sits 3/4” lower driver side
Hey, I know this is a super OLD video but were you running a RUF setting with the push pull steering before swapping to the HiSteer?
Gettin ready to do Emu springs and high steer on my 85 factory Straight axel. This video helped a ton as far as the power steering unit positioning which was hanging me up pretty good! Thanks!
What kind of power steering pump setup do you have and how does it do with the big tires
how does the truck handle at high speeds once you remove all the stabilizers?
At the beginning of the video you mentioned an aftermarket drag link. I just put a 3 inch lift in my 84 and encountered an issue with the stock drag link being to short. Where did you find the aftermarket drag link? Also, are carrier bearings supposed to get hot? The angle down to my rear axle is kinda screwing with my carrier. I will probably shim it down to accommodate the extra height.
Where did you get the plating for the steering box
Can you use the steering rods out of the donor 86-95 4×4 4Runner or truck too? Marlin Crawler board states that the steering box must be from a 4×4.
Avoca off 390
I watched till you said wellsville. I was looking for atv ps. I m from Jamestown ny. 1966. Never went back. You must know that youtuber straight east of you over in xxxx
thanks for taking the time to film this and put it up for others as a reference, very helpful
Maybe I missed it? What brand & size lift?
Great video man. Thank you for all the detail really appreciated since I am about to do the same on my 85 4runner
strange thing is mines an 85 and has the side motion steering box buts its also efi and independent front diff. awesome truck by the way
Where to get the ifs steering?
Beautiful truck and great video!
Beautiful truck. I'm building mine