yeah, so it was time to take care of the ol’ valve cover Gaskets on Lennon’s 1992 ‘runner. Pretty straight forward job, DO NOT remove the intake manifold com…
yeah, so it was time to take care of the ol’ valve cover Gaskets on Lennon’s 1992 ‘runner. Pretty straight forward job, DO NOT remove the intake manifold com…
You must be logged in to post a comment.
Step by step would be helpful.
Old truck? Lol I got an 86 toyota 4runner
Saved me fro moving a lot more lines than I had to, thanks =]
I was looking forward for a step by step video
Sounds like your battery is just dead. Make sure battery is up to snuff. As
as well as battery connections. Also check for ground cables bolted to
intake man. Does it crank over at all? or just nothing?
where is the transmission dipstick? 4runner 93
Same procedure on the 3,0 Mitsubishi(montero pajero)
can i do the same with the intake on a third gen 5VZ-FE?
Can you do a video on replacing the PCV valve on this engine? I don’t want
to remove the plenum if I don’t have to, but it appears the PCV valve is
beneath it. Thanks..
@saebbi My pajero caught fire because the valve cover leaked straight on
the glowing exhaust manifold, there was no shield around the manifold
before, now I know what purpose these shields have that I usually just
throw away if they are rotten, lol
changed valve covers but now it won’t start. I didn’t touch the cams.
Everything is back where they were. When i turn the key the radio and clock
dies. Any ideas? 94 4runner v6 3.4
what do you torque the bolts and do you use gasket sealant (permatex)??
helped alot thnx for the vid
What was the point of this video?
great video man!