Car Fix DIY Videos

1A Auto shows you how to repair, install, fix, change or replace loose, worn, or creaking ball joints. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, Toyota FJ Cruiser.

Buy Now!
New Ball Joint from 1AAuto.com http://1aau.to/ia/1ASFK04001

🔧 List of tools used:
• 19mm Socket http://1aau.to/tse/1AXAA00043
• 21mm Socket http://1aau.to/tse/1AXAA00043
• 24mm Socket
• Ball Joint Press
• Blowtorch
• Pickle Fork
• Pliers
• Side Cutters
• 1/2 Inch Breaker Bar http://1aau.to/thP/1AXAA00078
• Ratchet http://1aau.to/taeg/1AXAA00016
• Torque Wrench http://1aau.to/tqM/1AXAA00044
• Rust Penetrant
• Floor Jack http://1aau.to/trA/1AXAA00068
• Hammer http://1aau.to/ti7/1AXAA00091
• Jack Stands http://1aau.to/trY/1AXAA00065

For More Info visit us at http://1aau.to/h/bwx/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.