https://www.1aauto.com/strut-and-spring-assembly-front-pair/i/1assp00423?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=wLUDRfXic8A
1A Auto shows you how to repair, install , fix, change or replace your front struts with their loaded struts. This video is applicable to the 07, 08, 09, 10, 11 Toyota, Camry
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ASFK04803
1ASSP00423
1ASSP00493
1ASTS00810
1ASTS00811
1ASTS00812
1ASTS00813
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• 22mm Wrench
• 14mm Socket
• 15mm Socket
• 17mm Socket
• 22mm Socket
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Brake Parts Cleaner
• Rust Penetrant
• Floor Jack
• Jack Stands
🔧 Instructions:
1. Removing the Wheel 0:28
2. Removing the Sway Bar Link 1:18
3. Removing the Front Strut 3:22
4. Installing the Front Strut 7:30
5. Installing the Sway Bar Link 9:59
6. Installing the Wheel 11:04
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
if its just the strut boot thats broken can you change that or is it just easier too replace the whole assembly
Do you need to have a front end alignment done afterwards?
Interesting and well explained,demonstration.
Thank you so much for having so many repair videos. I really appreciate them. About to pay a little more to buy parts from you (1A Auto,) because you have these helpful videos.
I replaced mine but on driver side. After like 2 weeks of replacing it, started squeaking on bumps. What did I do wrong?