Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 14 Toyota Tundra
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/takS/1AXAA00013
• 10mm Socket http://1aau.to/tPe/1AXAA00017
• Trim Tool Set http://1aau.to/tgS/1AXXX00004
• Needle nose pliers http://1aau.to/thC/1AXAA00051
• Needle nose pliers http://1aau.to/thC/1AXAA00052
• Ratchet http://1aau.to/tWT/1AXAA00016
• Socket Extensions http://1aau.to/t4Q/1AXAA00015
• Gloves http://1aau.to/tcv/1AXSS00048
For More Info visit us at http://1aau.to/h/aXj/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Thanks for the help. As one other person posted, the owners manual says to go through the wheel well, but that proved to be unworkable for me. This method worked great and was actually more intimidating than difficult. Thanks again.
Back in the day I always had a service manual to help out when replacing parts. People taking the time to provide/upload videos rocks. I found both bulb change videos online (wheel well skirt and this front grille method). Went this route where I thought I’d need full access to pull off the rubber bulb grommet and work the hold down clip. This method really was not bad at all. Nothing broke. Roughly took 2 hours to do both sides and also realized both side marker bulbs were out. This method just worked for me. (BTW – Takes 5 minutes to change my wife’s Honda Accord bulb). – Thanks for the read (2015 Tundra).
Awesome video. Thank you
in the Owner manual, said to access to the wheel well and turn the steering wheel opposite side of the bulb to be replaced, then remove the fender screws and liner clips. Why do the difficult way?
Great video…I was able to replace my headlights today and I didn't break anything. The most challenging part is removing the grill with the four clip on the bottom. TIP: After removing the top bolts and clips, pull the top of the grill that down just a few inches. If you shine a light into the side of the grill, you can see the top clip that you are supposed to push down on. I used a very long screwdriver to push it down and the right side popped right out…gently hold the grill up and then go to the other side and repeat. I have no idea how the mechanic knew where to push down on, I wasn't able to see the clips at all from that side.
Thank you! Made changing my lights easier!
Excellent video. Saved me lots of time. Thank you!
Thank you! This help me out today
Thank you for the great video! Made changing the head light bulbs a breeze
I felt very confident working on my truck after this video.. thanks
Owners manual states go through area by wheel, no need to remove all these extra parts.
F u toyota for doing this
Super video! Subscribed!
Thank you this video help me a lot!!!
Thanks a lot. I just finished changing my bulbs. This video really helped. With the recommended tools it was a breeze.
Thanks for the video, great help. Not a 5 minute job, but not too difficult.
I have a 16 Tundra and want to change the halogen to bright white LEDs. I thought it would be simple like MOST cars, But damn this walkthrough (great job btw!) makes me not want to touch it! To replace a lightbulb..really?
I have a Tundra and I am unsuccessful removing the bulb from the inner fender well, as insane as it looks removing the grill is the only way to change a bulb on this truck. I probably will sell it just because of that, you would think Toyota are well thought trucks: it's just another myth: a piece of junk!
Just for future reference you dont have to pull the two 10 mm bolts on the filler panel.
is crazy that you have to remove the front grill just to change the head lights.