Buy Now!
New Fuel Pump and Strainer Set from 1AAuto.com http://1aau.to/ib/DEFSU00051
This video shows you how to install a new fuel pump & strainer from TRQ on your 2012-2017 Toyota Camry.
This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
Tools you will need:
• Pocket Screwdriver
• 8mm Socket http://1aau.to/obEB/1AXAA00017
• Trim Tool Set http://1aau.to/oavg/1AXXX00006
• Ratchet http://1aau.to/ob6r/1AXAA00016
• Socket Extensions http://1aau.to/ob4D/1AXAA00015
• Gloves http://1aau.to/oaYY/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Drain Pan
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Rust penetrant on plastic components is a horrible idea. It will degrade, dry out, and crack the plastic even if you wipe it all up. Use silicone spray if anything on plastic components. Also, if you keep your fuel level well above a quarter tank, you’ll never have to do this repair.