2012-2016 Toyota Camry battery remove and install

2012-2016 Toyota Camry battery remove and install

2013 Toyota Camry battery replacement.

Tools:
http://amzn.to/2aDYK1X 1/4 ratchet
http://amzn.to/2aSOq6i 1/4 10mm socket

Parts:
Battery

Torque specs:
http://amzn.to/2aDZqER 3/8 Torque wrench
10 ft. lbs – battery bolts

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook
http://bit.ly/nutzaboutbolts1

and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2

158,391
Like
Save


Comments

Ctyler93 says:

How would I go about replacing the negative terminal I need something that is more suited for running extra wires for accessories.

Vincent Scales says:

Well I'm due to replace my 2016 Toyota Camry SE battery! I saw it is good idea to replace a car battery every 4-6 year if you live in a Northern state, which I live in PA! I'll start looker for batteries while checking it every fall.

Specs Bundy says:

what size sockets were used ? need to go buy them

Gm Mg says:

Great & helpful video – it worked! Much appreciated.

Tun Thura says:

Hello, When I click the upper left corner of OBD II BATTERY MEMORY SVER link, nothing come out. I want to watch it. pls advise how to watch that one. thanks.

Tardar Sauce says:

Great video, but the bolt holding the bracket down broke off with the stem still in the car. Is there another way to stabilize the battery until I get it out?

nikhil patel says:

very simple and easy demostration thanks likem it

Steven Lin says:

Which one is first to take out battery positive or negative ? And which one is first to put in positive or negative?

Cio Sibal says:

Same battery

David Campbell says:

Canadian Toyotas have maintenance free batteries in them. They might also be stronger due to extreme cold conditions. When you cranking a car up at -40 F you need a battery with some GONADS!

Ayleen Valencia says:

(nuts and bolts) after replacing my battery my corolla 2013 rpm drops pressing the brake pedal when stoping at a red light or stop sign and car vibrates an shakes idle drops to 600 ..but then goes back to normal..do you think is a dirty throttle body?? Or bad pcv? or it needs the idle relearn?

alulla kefe says:

very help full instruction
BTW can you add about hoe to check and level the battery electrolyte Level?
thanks

Obi Wan says:

whats the torque spec for both left and right terminal please

MBOGUN1 says:

Thank you .

von lessig says:

omg,..what a terrible video.,..seriously ..how about some sockit sizees..and its not 1/4 inch ratchet …its 1/4inch drive

Neville Guerrero says:

Lol you cover the positive NOT the negative

Lisbeth FG says:

Thank you 🙂

ITGUY DFW says:

Thank you, I always like to look at videos before I go out to do work on anything. Visual learning is great. Thank you for posting this video.

Brandon Elam says:

Thank you thank you thank you! Your are a life saver. This definitely works on a 2016 Camry.

427 Elevating Productions says:

so this was a 2013 car and uploaded in 2014 was battery really already shot or was this just your demonstration you did

Howard Jow says:

I did not use the device to remember my settings and I did not have any problems.

Howard Jow says:

Thank you for the video. For a 2012 Toyota Camry LE, it remembered all of my radio stations and no issues with car alarm. I only had to adjust my clock and pick my radio station after install.

waqas alsaadun says:

how many ampers in the battery of camry SE 2014

Comments are disabled for this post.