Trying to save the amount of power consumed when using the interior lights I installed LED replacement bulbs in place of the stock incandescent bulbs. I show…
Trying to save the amount of power consumed when using the interior lights I installed LED replacement bulbs in place of the stock incandescent bulbs. I show…
You must be logged in to post a comment.
){kind=link}
Try working it out with either some needle nose pliers or maybe a small
flat screwdriver. Be careful with that broken glass though! Good luck 🙂
Sorry for the delayed response. I had a link to them in my other video and
forgot to post them here. Here is the info on the bulbs, Bulbs purchased
were: 5 Diode LED Bulb – Item #261125208578 Title: 1 PCS White 12V T10 194
168 W5W 5-SMD LED Car Light Bulbs Seller: Hero-ho 10 Diode LED Bulb – Item
#221004866925 Title: T10 168 194 501 W5W Side Wedge Car LED Light Bulb Lamp
12V 10 SMD Seller: Globelstation
thanks, i might try it one day. have you ever thought about replacing your
turn signal and tail light bulbs with LED ones? it doesn’t seem too hard
and I love the look of LEDs. Unless you have to install a ballast for
them…
I tried not twisting the bulb while removing it.. but I accidentally
twisted it a little.. now the part where the bulb is popped in and I cant
get it out.. do you know how to fix it? 🙁 please help
I believe the were 194/168 type wedge style bulbs.
how do u change the back lights
I’ve just install 11 white LED bulbs on the interior my 2007 Toyota Sienna.
I’ve purchase mines from eBay as a kit of 11 bulbs. After the installation,
I did notice that the interior was much brighter and consuming about one
third of the electricity as before.
how do you change the cabin lights? or the puddle lights on the doors. is
it almost the same? thanks
I do think the HID bulbs are the same on the 2010 if I remember correctly.
yep, almost exactly the same. if you look at the lens on the light there is
a spot that you can pry behind with your flat screwdriver and the lens pops
off. The puddle lights on the doors are a different style of bulbs though.
I just ordered mine! Stock bulbs are yellow and lumens is very low. Thanks
for this awesome video, quick and easy, anyone can do it.
Pretty much exactly the same. Use a flat screwdriver to pry on one of the
sides to release it from one of the pins. once you have that side
disconnected the other side though just fall out. Thanks!
What is the number for the interior lights?
Hey there Patrick, we have the 2010 Sienna SE. Can you share the URL or
supplier you purchased your LED’s from on eBay? Also, any thoughts on
replacing the HID headlight bulbs? Do you know if the bulbs in your 2004
are the same as the 2010?