1996 Toyota Camry front brakes service. If your brakes are making noise, or your brake pads are below 2mm, we recommend you to service them.
Tools:
http://amzn.to/2aCThW4 12mm socket
http://amzn.to/2awcY1Z 14mm socket
http://amzn.to/2b0vAfI 17mm socket
http://amzn.to/2awcRDO 3/8 Ratchet
http://amzn.to/2awftS1 Caliper piston depressor
http://amzn.to/2aE11KN Brake 3M anti seize
http://amzn.to/2aCVoJz Brake 3M silicone paste
http://amzn.to/2b5169E Brake clean
http://amzn.to/2aCSvZa Rags or towels
http://amzn.to/2bpDuLM 8.25 hext bolt for rotors or drums
Parts:
http://amzn.to/2b4YbQi Brake pads
http://amzn.to/2awg0TW Rotors
Torque specs:
http://amzn.to/2awfDcd 28 ft. lbs – Caliper bolt
http://amzn.to/2awfDcd 79 ft. lbs – Caliper mounting bracket bolt
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
http://bit.ly/nutzaboutbolts1
and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2
){kind=link}
great video! a question – what's the impact tool that you use at 3:22? looks like an air powered impact driver?
Will these instructions work for a 2004 Camry?
just add brake fluid save $$
8mm socket (front) and wrench (rear) to bleed the brakes.
Question – Found that when I put the caliper back on and secured the bolts to the slide pins, I could not get a firm "tightening" my assumption is that you put a box wrench on the slide bolt head, then tighten the bolts??? Looked like you were able to torque yours just fine. Thanks for making the video!
Awesome ..! Thanks
Great Job My Friend…Remember that Jesus Love's You!!!
Thanks, made the break repairs on my 93 Camry real easy.
Thank you. Helped me on my 96 Avalon
Do I need to buy separate anti seize and grease or can I use anti seize on the caliper bolts or brake grease on the contact points on the pads and clips?
help me go Watch my video and tell me wat wrong
Very nice video! It's clear you're really thorough. I'm going to do exactly as you said.
THANKS..! ^_^
Never mind. I saw it on your notes. Thanks for the video. Fantastic lighting.
I mean do you know the torque required for the 17mm?
Do you the torque required for the 17mm?