Car Fix DIY Videos

How to change the fork seals on a Suzuki VS1400 Intruder – Part 1 of 2.
Learn the process of disassembling, inspecting and rebuilding the front forks on your Suzuki VS1400 Intruder.
Using simple tools, we can tear down the forks, but there is one tool that I would highly recommend that you purchase, and that is a seal driver.
A fork seal driver is designed to make installing new fork seals a simple and easy process. Fork seals on any motorcycle need to be seated correctly otherwise you will end up with leaking front forks on your intruder shortly after you re-install them.
Ensuring that the dust caps are seated correctly is also a key factor in changing the fork seals, if you have not ordered a fork seal kit, I highly recommend that you click the link below and get yourself a set.

You need a total of 354ml of fork oil in each fork with stock jugs.

Parts Used In This Video:
Fork Seals and Dust Cap Kit: https://amzn.to/3q1qbXH
10 WT (Firm) Fork Oil: https://amzn.to/2MIILpb
7.5 WT (Medium) Fork Oil: https://amzn.to/3blfCKZ
Fork Seal Driver: https://amzn.to/2L6SgOk
Suzuki Damper Rod Tool: https://bit.ly/2BQuLED
Impact HEX Socket Set: https://amzn.to/3np3cnn

Suzuki Intruder Workshop Manual:
Clymer Repair Manual Suzuki Intruder VS1400: https://amzn.to/3onx9FP

Popular Clutch Parts for Suzuki Intruder VS1400:
Clutch Gasket by Caltric: https://amzn.to/3rUlrEZ
Clutch Friction Plates by Caltric: https://amzn.to/2Lrtsk0
Gasket and Friction Plate Kit by Caltric: https://amzn.to/2XeMvQW
Tapered Steering Stem Bearings by All Balls: https://amzn.to/38jGlWc

Popular Carburetor Parts for Suzuki Intruder VS1400:
Carburetor Rebuild Kit by KIPA: https://amzn.to/35bGWY7
Rear Diaphram Membrance by Lanbao: https://amzn.to/2MIDrCd

Popular Fuel System Parts for Suzuki Intruder VS1400:
Spark Plugs by NGK: https://amzn.to/38hsZtB
Iridium Spark Plug by NGK: https://amzn.to/2JQ3o1n
Pod Filters by DNA: https://amzn.to/3s1AA7u
Fuel Pump by Bruce & Shark: https://amzn.to/35dxG5S
Fuel Pump by OSIAS: https://amzn.to/2LrUc3T

Popular Brakes Parts FOR Suzuki Intruder:
Front and Rear Brake Pads by Master Chen: https://amzn.to/2JQlgJD

Popular Electrical System Parts for Suzuki Intruder VS1400:
Replacement Battery (YTX16-BS-1) by PowerStar: https://amzn.to/2XjjXWy

Popular Tools:
22 Litre Ultrasonic Cleaner: https://amzn.to/397dDXN
6.5 Litre Ultrasonic Cleaner: https://amzn.to/2MGCFpd
BelRay High-Quality Waterproof Grease: https://amzn.to/2LaLerV
Rotary Tool: https://amzn.to/2MGU9lh
Screw Driver Set: https://amzn.to/392Fato
Social Links:
Instagram: https://www.instagram.com/intrudervik…
Facebook: https://www.facebook.com/hagarmoto/
Suzuki Intruder VS1400 Group/Forum: https://tinyurl.com/v7ag95g

OEM/Used Intruder VS1400 Parts for sale here –
Website: https://www.hagarmoto.com

If you have any questions, please leave them in the comment section below, hit subscribe and I’ll get back to you asap.
_____________
This is the biggest project I have taken on, The bike will be completely stripped down to the frame, the engine will be removed for new piston rings to be installed, the wiring harness is going to be rewired and the entire bike overhauled, ready for spring 2020….I hope.

[***Disclaimer***]

Please keep in mind that I am not a mechanic, I have no professional training and the advice that may be interpreted from these videos is purely my own opinion and does not reflect that of which a professional mechanic or motorcycle engineer would provide. Please note that some links provided in the description may be affiliate links.

Some of the links provided may be affiliated links.
——-
Motorcycle Specs:
Manufacturer: Suzuki
Model: Intruder VS1400
Year: 1997
Engine Size: 1360cc
Fuel Type: Petrol – Four Stroke
Cooling System: Air/Oil Cooled
Transmission: 5 Speed
——-
Camera Gear:
Sony A7iii: https://amzn.to/2KUX5qq
Interfit Light: https://amzn.to/3bVptEw
Neewer LED 660 Panel: https://amzn.to/3deNBT3
Lapel Microphone: https://amzn.to/2yk3wR2
Rode VideoMic Microphone: https://amzn.to/2YrmpMo

#hagarmoto #suzukivs1400 #suzukiintruder