In this video I replace the stator cover on a 2018 GSXR 750. This process will be the same for most of the late model 750s and 600s. 2006 – 2019.
Subscribe for more great motorcycle content: https://www.youtube.com/channel/UCPT7VTqYA0WuzDYJGVfkjXQ?sub_confirmation=1
Check out our website at https://www.empcycleworks.com/
Watch our most recent videos here: https://www.youtube.com/channel/UCPT7VTqYA0WuzDYJGVfkjXQ/videos
Check out our Engine Performance Playlist: https://youtube.com/playlist?list=PLH2UPfEFFPy8_MWE5FCAFbeN8U_8KMrQm
Checkout out Suspension playlist: https://www.youtube.com/playlist?list=PLH2UPfEFFPy_ZgKoTKsGeeWBuLXPHgJuZ
Social Media Links:
Facebook: https://www.facebook.com/empcycleworks
Instagram: https://www.instagram.com/empcycleworks
){kind=link}
Would it be the same for a gsx 250r 2015??
thank you so so much for the detailed video. had no problems and am back on the road
This is a throw in the dark, but if im guessing right, south bay? Id be down to take a look, supply parts, will tinker
Thanks for the video it helped me change mine. I should have listened to the torque wrench aspect cause I broke off the bolt head to one of the top stator cover bolts. Not too big a deal as it doesn’t leak and it’s hidden by the fairing so I’ll just end up riding it until I either attempt to remove the broken bolt or just get a new stator cover and actually use a torque wrench this time
How much does the replacement stator cover cost?
Is the procedure the same for my 2005?
Amazing video and break down. Ive got a small leak around the stator. I used gasket filler. What could be causing this issue?
you should link to the torque specs and any products used to make it easier for me to find.
this was great video. thanks
Dude don’t spray break cleaner on your hands it causes cancer, nervous system damage, and reproductive harm
My bike headlight flickers at about 8/10k rpm and above when I’m going through the gears. What could be the issue ?
2018 GSX-R1000
Thank you.
will the stator cover leak if you don’t use any gasket sealer?
Quick lock tite would be best to use? I hear red and you mentioned blue so I’m congmfused
I’m having and issues where I’m getting no power to my fuel pump after replacing it and I took a picture of it when I took it out so I can install it back properly. I was only able to get it to prime once before that issue began
Could this part keep the engine from actually starting turning over to an idle? I have an K4 600. Ive got fuel, air and spark. Cranks all day long just wont run.
i just replaced mine now its has a really slow start i charged the battery but i dont know what im doing wrong
Where do those two hoses that connect to the gas tank go?
After installing the stator, I hear a sound coming from it. What do you think the issue is?