Thank you for you video, had almost the same thing happen to my 92, thought
it was the pump and changed it. not the problem watched you video, checked
the plug and the wire was corroded right off, soldered it with a splice
problem fixed, thanks again for you time.
You did a good job. I’ve done a few up here as well. Just cut the plug and
spliced with solder and heat shrink. I use a small hand held sand blaster
to clean out the electrical plugs then apply some die-electric grease to
complete the repair. Nice video and I’m sure it will help others.
){kind=link}
good video keep em comin
Thank you for you video, had almost the same thing happen to my 92, thought
it was the pump and changed it. not the problem watched you video, checked
the plug and the wire was corroded right off, soldered it with a splice
problem fixed, thanks again for you time.
You did a good job. I’ve done a few up here as well. Just cut the plug and
spliced with solder and heat shrink. I use a small hand held sand blaster
to clean out the electrical plugs then apply some die-electric grease to
complete the repair. Nice video and I’m sure it will help others.