How to install a 12 volt power outlet (cigarette lighter) on your motorcycle.

How to install a 12 volt power outlet (cigarette lighter) on your motorcycle.

Here is a 12v power outlet (cigarette lighter) install done on a Suzuki Hayabusa. This can be used to charge your cell phone, power your GPS or just about an…

35
Like
Save


Comments

Steve Young says:

Not water proof. They sell them that state they are marine ready however
require a lot of maintenance. “Battery Maintainer” actually it is the
Deltran battery tender and can be used to charge your cell phone.

Theknotman1964 says:

Shit video

extermedog says:

will it discharge battery when not in use?

SlowRide says:

…directly to your tender lead for a 10 second installation.

nogisimon says:

do you have a fuse i didnt see a fuse your gonna burn our tomtom rider
iphone, ht or whatever you plug into that bike or worst start a fire

jennings0418 says:

Easy. Find a wire that is hot only when the ignition is on and splice the +
(red) wire into it. You can attach the ground anywhere on the frame.

vorkev1 says:

first off you did not show how to install and 2nd you need to conntect the
adapter threw a regulater and stablizer or you can cook what ever is pluged
in since on motercycles when you give it throtel the voltage goes up as the
more voltage is kicked out buy the alternator on in some cases and most
generator

269donny says:

Do you know how to connect it to the ignition?

Danim24 says:

Pretty easy, pretty straight forward, pretty obvious!

JTAUTOS says:

i have 2 restores on my bike so all you have to do attack the + and –
straight to the battery ?? will the restores make a difference cause i dont
want to blow up my gps

hank brown says:

Some bikes have places for accessories in the fuse box just for this kind
of stuff.

74DodgeChallnger says:

haha thank you i just typed out a big long question and then thought i cant
be the only one with this problem so i read through the comments and you
answerd it for me and im doing this on a 4 wheeler so can i use the neutral
light wire

Marty White says:

Why did you not use the battery tender lead that is just laying there as
your power source to the adapter instead of hard wiring to the battery?

SlowRide says:

You could have just got a 12v socket that connects do erect

CRUZADOR2700 says:

How come no step-by-step installation? All you did was talk about the
product.

SconsinJoe says:

More like..”how to show what I’ve already done”! No help at all!

Write a comment