Join Maker Studios! Click here to see if your channel qualifies for RPM Network/Maker Studios: http://awe.sm/fH83N Suzuki Samurai 1.3 liter Music from: Freep…
Join Maker Studios! Click here to see if your channel qualifies for RPM Network/Maker Studios: http://awe.sm/fH83N Suzuki Samurai 1.3 liter Music from: Freep…
You must be logged in to post a comment.
I want to support the fallopian
I recently replaced the head gasket on my 95 suzuki sidekick. I didn`t have
the dows so i cut the headsoff of 2 old head bolts and used them as guides
and eyed up the heagasket on the block after putting sealant on.Then pt
sealant on the top of the hea gasket too. Is it ok to do it that way or
should I take it back off before I get anything else put together?
i will be taking on the same project this weekend. how long did the entire
project take? what psi do i torque the head down? do you have any other
tips that could help me out?
I used ordinary engine oil just to make it softer that this works better as
a gasket. But I recommend engine silicone, thin layer not too much works
like a glue.
I may have to do same shit
can you tell me what you used on the intake manifold gasket? I’m currently
replacing the head gasket on my suzuki
After how many klm we have to retight the head bolds?
Tightening torque for cylinder head bolts is 63 – 70Nm. Can`t tell how long
it took I did there so many things. But when only the head gasket maybe it
will take 4 hours.
Engine runs great, right now I dismantled the gearbox as soon I get parts
from dealership I upload a new video.
Love ur video