1A Auto shows you how to repair, install, fix, change or replace a broken,damaged, or failing windshield wiper motor. This video is applicable to the 08 Subaru Outback
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oME/1AXAA00013
• Pry Bar http://1aau.to/odY/1AXAA00020
• 10mm Socket http://1aau.to/oAN/1AXAA00017
• 14mm Socket http://1aau.to/oFk/1AXAA00015
• Trim Tool Set http://1aau.to/ohI/1AXXX00004
• Adjustable Wrench
• Ratchet http://1aau.to/oNo/1AXAA00016
• Socket Extensions http://1aau.to/oFk/1AXAA00015
• Torque Wrench http://1aau.to/omN/1AXAA00044
• Marker / Writing Utensil
• Pick http://1aau.to/od8/1AXAA00037
For More Info visit us at http://1aau.to/h/aqo/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great video! Helped me a lot!
Is it bad to remove the wiper motors before you have a new one? My wipers won’t stop wiping and I want to still drive my car before I get a new motor.
Thanks for the video! It gave me exactly the information I needed to replace the broken wiper mechanism on our 2005 Legacy Outback wagon. It's like a new car now! Well, a car that has working wipers, anyway.
Thanks to another video, I was able to replace my window regulator on my 2011 legacy, thus saving me about $300.00. However being an old person and if my wiper motor fails, I may just have to use "RainX", Thank you so much for posting.
Thank you so much! You not only helped me fix this issue but also gave me the motivation to try to fix other issues in my car.
After re-mounting the assembly, my wiper arms are scraping the windshield. The arms where the springs are ( the joint of the wiper arm) to bend the arms up. Any thoughts?
Putting indexing marks on the motor prior to disassembly is great if you're just repairing and reinstalling the existing motor, but if you're replacing it with a new motor then putting marks on the old motor isn't going to aid with installing the new one.
Do you have a video for the rear wiper motor?