Car Fix DIY Videos

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK01477

This video shows you how to install a front outer tie rod on your 2003-2008 Subaru Forester. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This process should be similar on the following vehicles:
2003 Subaru Forester
2004 Subaru Forester
2005 Subaru Forester
2006 Subaru Forester
2007 Subaru Forester
2008 Subaru Forester

Tools you will need:
• 19mm Wrench http://1aau.to/oa/1AXAA00010
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Pliers
• Side Cutters
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Center Punch http://1aau.to/oa/1AXAA00055
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.