How the buying stuff from junkyard works in your town or country or county,
sorry, english is not my native language. You take the part off the car,
then go to the office, show them the part you took off and they will tell
the price?
Hmm, lots of junk plastic up there, im sure they could have made that
better. And the size of the torx you have to use, im old fashoned and would
have a 17mm bolt head, im no lover of change for the sake of change. Well
that was a belt-er lol ooow sorry bad jokes again :-))
The cable-drawn, passive restraint-type chest belt on my 93 SL1 does not
retract well at all in cold weather (anything below 55 degrees Fahrenheit).
When it’s really cold it can take 5+ minutes to retract even when I relieve
the tension on it by pulling extra belting out of the spring-loaded spool
down near the shifter. It works fine in warmer weather. I am unable to find
any resources on how to repair this problem. Any suggestions?
do you have a video on how to remove and replace an accelerator pedal
position sensor on a 2002 Saturn vue awd 3.0L ? and if not can you please
make one? thanks
He probably removed it because he might plan to weld the rear door shut and
remount the seatbelt post to the b pillar for better safety and less
windpipe strangulation.
){kind=link}
How the buying stuff from junkyard works in your town or country or county,
sorry, english is not my native language. You take the part off the car,
then go to the office, show them the part you took off and they will tell
the price?
Tell you what, you have got some great use out of that panel remover tool,
i think it is becoming a bigger legend then yourself!
I need to replace the seat belts in my sl1 front seat and would love to see
how. If I want to replace the short side do I need to take the seat out?
93 SL1 belt problem continued: It’s only on the drivers’ side. The
seldom-used passenger side passive belt does not have this problem.
I have not worked on that system to know what might fix it wish i did.
Thank you for the request i will put it on my list.
@rich , what was wrong with this saturn why was it rotting in the junk yard
They were not in a accident.
Great, thanks
Is there anyway you can do a video on how to take out a sun roof track on a
second gen sl2
Hmm, lots of junk plastic up there, im sure they could have made that
better. And the size of the torx you have to use, im old fashoned and would
have a 17mm bolt head, im no lover of change for the sake of change. Well
that was a belt-er lol ooow sorry bad jokes again :-))
The cable-drawn, passive restraint-type chest belt on my 93 SL1 does not
retract well at all in cold weather (anything below 55 degrees Fahrenheit).
When it’s really cold it can take 5+ minutes to retract even when I relieve
the tension on it by pulling extra belting out of the spring-loaded spool
down near the shifter. It works fine in warmer weather. I am unable to find
any resources on how to repair this problem. Any suggestions?
Thank you rich
Looks like he was removing the belt from a junkyard car. It has greasepen
writing on the window.
Thank you for the request i will put it on my list.
Someone asked if i would do a video on removing the drivers side belt on
the three door SC.
do you have a video on how to remove and replace an accelerator pedal
position sensor on a 2002 Saturn vue awd 3.0L ? and if not can you please
make one? thanks
He probably removed it because he might plan to weld the rear door shut and
remount the seatbelt post to the b pillar for better safety and less
windpipe strangulation.
Why did you take out the seat belt assembly? Was is broken or what?