Hi, Do you know if these sub frames are the same from 91-97? I have a 93
and the way the shield clips to it, the 2nd one I got is rotted at the
control arm on the left side.. Just wondering if you know if there all the
same. Thanks.
I just removed my buddies engine cradle from his 97 sl2 and i didnt have to
remove the rack from the lines thats just extra work thats not needed.. but
i did strap the outer ends up so when i went to put the new cradles back it
they wouldnt be flopping around and getting in my way same with the
calipers and cv axles
i have a 04 pontiac gto with the same problem i was in an accident and the
car was hit from the front driver side. the chassis bent in also did the
subframe. My mechanic said i need a new subframe in order for him to pull
out the chassis back to place. Can i have the car running like before.
TOShawn, thanks for the overview. My 95 SL is up on the stands and ready to
go tmro. morning. Rusted out on the drivers side. I’m going to mark the
position of it before it comes off. I was just reading about someone who
had some tweaking to do ’cause his car was pulling to one side. Nice touch
with the audio (dog bark w/ the dog bone removal). I’ll remember that if I
start loos’n patience, hehe. Looks pretty cut n dry though. Thanks again
Thank you very much for posting this video! It was a great help to me in
repairing my ’98 Saturn SW2. I had the very same accident – hit a curb with
the front tire and bent the subframe. I’m no accomplished mechanic but with
yours and others help I was able to get my car back on the road. Thanx
again!
Hi, Do you know if these sub frames are the same from 91-97? I have a 93
and the way the shield clips to it, the 2nd one I got is rotted at the
control arm on the left side.. Just wondering if you know if there all the
same. Thanks.
I just removed my buddies engine cradle from his 97 sl2 and i didnt have to
remove the rack from the lines thats just extra work thats not needed.. but
i did strap the outer ends up so when i went to put the new cradles back it
they wouldnt be flopping around and getting in my way same with the
calipers and cv axles
i have a 04 pontiac gto with the same problem i was in an accident and the
car was hit from the front driver side. the chassis bent in also did the
subframe. My mechanic said i need a new subframe in order for him to pull
out the chassis back to place. Can i have the car running like before.
@Mazdaracer4fun Yes. Like I said in the video, leave the rack in if you’re
not replacing it! shawn
I just damaged mine I have a 1992 sl1 runs great but subframe is damaged
told me to scrap the car thanks for the info
Thanks, your video helped greatly.
I like how your dog began to bark when you said “dogbone mount”
TOShawn, thanks for the overview. My 95 SL is up on the stands and ready to
go tmro. morning. Rusted out on the drivers side. I’m going to mark the
position of it before it comes off. I was just reading about someone who
had some tweaking to do ’cause his car was pulling to one side. Nice touch
with the audio (dog bark w/ the dog bone removal). I’ll remember that if I
start loos’n patience, hehe. Looks pretty cut n dry though. Thanks again
Thank you very much for posting this video! It was a great help to me in
repairing my ’98 Saturn SW2. I had the very same accident – hit a curb with
the front tire and bent the subframe. I’m no accomplished mechanic but with
yours and others help I was able to get my car back on the road. Thanx
again!