How To Replace Chevy Equinox, Saturn Vue Ignition Switch – Step By Step Guide

How To Replace Chevy Equinox, Saturn Vue Ignition Switch – Step By Step Guide

Today we’re gonna show you how to replace an ignition switch. How do you know if the ignition switch needs to be replaced? In my case we had smoke coming from the steering column. Ignition switch replacement costs can vary from $80-$110 from what I’ve found.. If you think you have an ignition switch failure, check for smoke coming from your steering column. You will have to get a new key when replacing the ignition switch. There are many way’s to know if you have bad ignition switch. You DO NOT have to remove the steering column to replace a bad ignition switch in the Chevy Equinox, or Saturn Vue’s. If you need to know how to change your ignition switch I cover everything you need to remove in order to get your ignition switch removed and replaced.

I’ll also show you how to remove your turn signal switch and how to remove your windshield wiper switch in this video. As that was what was actually causing the smoking from your steering wheel.

Sweet Tips and Money Saving Tricks!
How to use a Towbar on ANY VEHICLE: https://www.youtube.com/watch?v=r73e3mDuQsg&list=PLWSrc_bUH2bWt2NLFxd2YWwnaUQM9-T-z&index=1&t=250s
Possible reasons for spongey brake pedals, and how to fix them!: https://www.youtube.com/watch?v=mxxgQKfO1k8&list=PLWSrc_bUH2bWt2NLFxd2YWwnaUQM9-T-z&index=2
How to Remove a Stripped Lug Nut: https://www.youtube.com/watch?v=–B6S4PuKgc&list=PLWSrc_bUH2bWfS2aksuY1uEDNOqzlffF3&index=10
Unlock any car door without calling a tow service: https://www.youtube.com/watch?v=_UWtP1Dk55A&list=PLWSrc_bUH2bWfS2aksuY1uEDNOqzlffF3&index=14

Reach out to us!
Clay’s AC and Auto Repair: https://www.facebook.com/claysacandauto
The Clay way Patreon: https://www.patreon.com/TheClayWay
The Clay Way Twitter: https://twitter.com/thenewclayway?lang=en

FOR THE BIGGEST AND BEST PARTS CATALOG, CHECK OUT DORMAN PRODUCTS AT: https://www.dormanproducts.com/pages/resources/catalogs/dorman.aspx

⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here’s some tools to get started! Thank You!
OBD2 Scanner TOPDON AD600S Scan Tool, Code Reader: https://amzn.to/3Ot0gDR
Duratech Rachet Set (1/2, 3/8, 1/4): https://amzn.to/3fvnJJ7
DEWALT 20V Max Impact Driver Kit, 1/4-in: https://amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: https://amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: https://amzn.to/39sTSxT
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: https://amzn.to/3Nux6UL
ANCEL V6 PRO Bidirectional Scan Tool: https://amzn.to/3wRcvDy
CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: https://amzn.to/3NbWUpe
Thorstone No Spill Coolant Funnel Kit: https://amzn.to/3m1dADS

Join this channel to get access to perks:
https://www.youtube.com/channel/UCN5vooKqMU5vBh3waQ-5bww/join

The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.

This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!

Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products

955
Like
Save


Comments

Jimmy Ford says:

Good work! Very edumacational!

Bugzie-A1 says:

i like your videos, but you are very hard to understand you jump one to another

Charles Heinle says:

Just make sure if you're swapping switch assemblies between Vues, you match years! Strange things happen otherwise, ask me how I know!

Comments are disabled for this post.