Hey guys and welcome back again, this a short video (DIY friendly) for how to diagnose such a condition if you suspect the ABS module, ofcourse a no start condition could be due a 1000 reason, most important reason is a low voltage in the battery which i assume you charged or replaced if thats the situation, make sure your battery voltage is above 12 and stays above that while the key is in the crank position.
Enjoy the video.
Hi is this the same inu unit for the b284 engine? Thanks for the reply
What happens if you shorted something when your trying to start your Saab in the relay box under he hood I stuck the damn wires in the wrong hope and I'm having problems with it starting now it's cranking but not starting
The only way to fix this permanently is to re solder the pcb in that ABS module but my question is, if i get my car to start that way, will it get damaged if I plug the big fat connector back in while its running?
That was my problem , ABS module , after throwing parts at it with another mechanic
Hello, I have a 9-3 2.0 t, my question is if I try this and the car starts what is my next step? Do I replace the module?
Hi I have a Saab 9-3 03 vector sid is saying key not accepted, have transponder codes key turns but no crank tried to jus a jumper the car cranks but no start gets spark for a few seconds and it stops getting sparks ?
U2105-00 fault code
Saab 93 2008 Vector Sport 1.9
Does not start or crank
Your method does not work on mine, sad.
Maybe you have anything in your mind?
I want to tell You THANK YOU Your video WORKED THE FIRST TIME!
Hi my saab 93 2006 model has the exact same problem after i charged the battery for a week is there a fuse for that when i turn the key nothing will give it a try
What if no abs light, no lights at all. No start no clicks. On a manual
where did you get the connectors soldered to the wires? Since the abs module has thicker pins than the male connectors that can be found in our saabs although of equal width. Furthermore, I need the two larger male pins that are still in the module to check the power supply.
hello there, I'm sure you can help me. I tried changing tire size with Tech2 tool and made some changes so the mileage gauge gives me accurate reading. 2003 Saab 95 Arc V6. So the mileage needle stopped moving. Than I changes ABS type setting to last one on the list. Milo meter started working but ABS warning lights came on. So I messed up some Tech2 settings. Please guide me to fix it. Thanks and regards
Great video amazing trick. I’m having the same issue of no crank no start and no communication. I tried this trick but unfortunately it didn’t work for me. But at least it’s one thing to scratch off the list.
Dude is a genius
When you repla the abs unit, does it need to be coded to the ecu ? or is it just a plug and play ?
Which Pins? Cant See it
Hi I have that problem too but also sid screen not working and can't find why
I can turn the key
There is no steering wheel lock at all
Traction fault on screen and sid not working
Also no communication
Any ideas?
What is the next step after this video ? I have to change that abs module?
Respect mate. Please leave me a way to contact you. Will not be for free
Hola COMO Es stas
'97 900S that cranks but won't start. Seems there is no spark to the plubs.
Hello and thanks a lot for this tip. My Saab 9.3 1.8t – 2008 is in this situation. Is it possible to drive it with the TCS/ESP bypassed ? Thanks