SAAB 9000 Fix Your Faded Hood Emblem Badge – Similar to 900, 9-5, and 9-3

SAAB 9000 Fix Your Faded Hood Emblem Badge – Similar to 900, 9-5, and 9-3

A short, but detailed video about the problems and solutions for faded SAAB hood emblems and badges. Replacement options are covered as well as a DIY tutorial on removal and replacement of the old badge to fix the problem.

Link to the seller I bought my emblem from: http://www.ebay.com/sch/discountshouse/m.html?_nkw=&_armrs=1&_ipg=&_from=

27,111
Like
Save


Comments

d graham says:

wished I had known this trick when I had my Saab. 9-3. Hatchback.

guitarlover302 says:

Some good quality badges available on Amazon in U.K.
Changed my bonnet and boot last week on Saab 9.3 convertible last weekend – masked all round and used very flexible kitchen knife to get under and remove old badges – screwdriver I found is too rigid

Graham W says:

Need to put double sided tape on it also

sirlaujz32 says:

I bought wheel covers. Peeled them off, peeled the hood ones off, then used a thin layer of JB Weld…just thought I'd share my idea.

MissA P14.88 says:

haha false alarm he just drilled it out now. thanks again

MissA P14.88 says:

help! I just helped my dad remove his bonnet slab badge but the actual two pins that hold it in…one snapped inside. what can we do? thanks in advance

Giff Packham says:

Thank you, very interesting.

MrBruinman86 says:

Using a piece of thread or floss as a saw to cut the adhesive is pretty effective as well – for those held by adhesive.

Fredrik Malmström says:

1 Like from Sweden!

zuiderzee1973 says:

Thanks! Just followed your instructions and did it in 5 mins.

SAAB AERO says:

Hi where can I get sticker type for the back one ?

Max Bousquet says:

is that embassy blue?

woodlax81 says:

thx man. Is there any way to replace the trunk emblem?

Whack says:

I love how its raining

andrew wilson says:

Brilliant. Many thanks

900 Saab says:

Any idea if the New NEVS Badge fits the 900? I'm wanting to do a little update to my 900

Simon Robertson-Young says:

Worked perfectly on my 10 year old SAAB! Great tip re plastic and feeler gauge. Thank you very much

MrNatetheepic says:

what worked for me on my 93 (and was safe for the paint) was to heat the emblem up with a heat gun (LIGHT HEAT DONT GET CRAZY WITH IT) and then take a credit card and run it all around the emblem and it came right up!

ebk60 says:

Not tryed on this particular item, but I have used dental floss, to remove other emblems on cars.

Aiko Linner says:

nice vid will probably do this to my saab, keep up the good work and have a great day sir

Write a comment