I have an ’04 9-3 Convertible, when I first looked at changing the bulbs, I thought there were going to be a lot of parts on the floor. Thanks for the easy to follow direction, it went flawless! Much easier than I anticipated.
It’s called the CIM. And don’t forget to add the plastic fog light cover to the list. Try Volvo & Saab auto dismantlers. They’re located in CA, have a HUGE selection, decent prices and cheap shipping. They have a website and links to nearly every car. Or you could see if your city has a Mega U Pull type of salvage yard. They usually have websites listing current inventory, and all prices. They would be the cheapest and most convenient.
Oh that makes sense. I have the same 03 9-3 and I’m looking for parts like, flip out cup holder, glove box, and turn signal switch that’s located inside of the sim or cid can’t remember what it’s called, do you know of any place to get these parts used?
My plastic cover fell off for one of my fog lights on my 9-3. So it only works now when I physically put my hands on the fog light and push on it. Is the reason for this because of that plastic cover not being there to apply pressure on the light, or would there be a short somewhere? Thanks
Hi and sorry the bug ya again , I being trying to find a relay for my fog lights but looks like there is not 1 for the fog lights it self I find 2 fuses but there fine , and tips ? Thank
check the relay. it’s probably only about ten bucks at advance auto parts so its worth picking up a new one and trying it out. Your owners manual has diagrams in the back of the fuses and relays.
The green fog light indicator is not showing anything , and the bulb that I replace was the left side but the old bulb looks good to me so I will check the fuses at this time
Do either of them work?? When you press the switch, does the GREEN foglight indicator come on in the instrument cluster? Which side did you replace? If you look in the access flap on the driver’s side there should be a wire harness attached to the plastic access flap, with a connector, make sure it’s connected. That wire harness supplies power to the fog lights, and the outside temperature sensor. If that is connected, check your fuses.
Nice video and thank you , I just have a question ? I have a 2005 saab arc , I did put new fog lights but they don’t work , and ideas for me ? Thank again
Extremely helpful video, i replaced my fog light in a jiffy. Thank you!!
Thanks chap that helped a lot!!
Thanks very much! Glad I could help!
Thanks for video. Very helpful 🙂
Thank you. A pointer in the right direction makes a big difference. Appreciate your effort. I will sell a job based on this info. Gracias.
Thanks for the feedback! Very glad I could help someone out! =)
I have an ’04 9-3 Convertible, when I first looked at changing the bulbs, I thought there were going to be a lot of parts on the floor. Thanks for the easy to follow direction, it went flawless! Much easier than I anticipated.
Awesome, I appreciate it. Maybe you could do a video on the cim dismantling, idk, just an idea lol. Thanks man.
It’s called the CIM. And don’t forget to add the plastic fog light cover to the list. Try Volvo & Saab auto dismantlers. They’re located in CA, have a HUGE selection, decent prices and cheap shipping. They have a website and links to nearly every car. Or you could see if your city has a Mega U Pull type of salvage yard. They usually have websites listing current inventory, and all prices. They would be the cheapest and most convenient.
Oh that makes sense. I have the same 03 9-3 and I’m looking for parts like, flip out cup holder, glove box, and turn signal switch that’s located inside of the sim or cid can’t remember what it’s called, do you know of any place to get these parts used?
There’s probably corrosion somewhere on the bulb housing, preventing good electrical contact.
My plastic cover fell off for one of my fog lights on my 9-3. So it only works now when I physically put my hands on the fog light and push on it. Is the reason for this because of that plastic cover not being there to apply pressure on the light, or would there be a short somewhere? Thanks
Hi and sorry the bug ya again , I being trying to find a relay for my fog lights but looks like there is not 1 for the fog lights it self I find 2 fuses but there fine , and tips ? Thank
check the relay. it’s probably only about ten bucks at advance auto parts so its worth picking up a new one and trying it out. Your owners manual has diagrams in the back of the fuses and relays.
The green fog light indicator is not showing anything , and the bulb that I replace was the left side but the old bulb looks good to me so I will check the fuses at this time
Do either of them work?? When you press the switch, does the GREEN foglight indicator come on in the instrument cluster? Which side did you replace? If you look in the access flap on the driver’s side there should be a wire harness attached to the plastic access flap, with a connector, make sure it’s connected. That wire harness supplies power to the fog lights, and the outside temperature sensor. If that is connected, check your fuses.
Nice video and thank you , I just have a question ? I have a 2005 saab arc , I did put new fog lights but they don’t work , and ideas for me ? Thank again
I can’t pull the bulb out, it stick very hard to the socket.
wish it were this easy for saab ng
Once again, thank you so much! You are better than my mechanic!