TUTORIAL: Cum sa demontezi evaporatoru de clima la Saab9-3 din 2006 1,9 150cp
TUTORIAL: How to disassemble the climate evaporator at Saab9-3 from 2006 1.9 150hp
Cum sa demontezi,,radiatoru” de clima din habitaclu fara sa demontezi bordu
How to remove the climate “radiator” from the passenger compartment without removing the dashboard
){kind=link}
Hello. Thanks for the video. Can you please let us know where is the location of the evaporator temperature sensor? Thanks
Thanks for this guide. This helps alot. This was the last malfunction in my cooling system.
Thank you for the help amazing video
Want to thank you a lot for making this video !
Helped me save money
Had to change the heater core on my Saab 9-3 08 which was located right below it
Hello! I'm receiving conflicting info if the Evaporator can be removed from cabin with or without the Expansion Valve still attached?
My concern is the two tiny screws holding the Expansion Valve are likely rusted seized need to be drilled out will be €×#+ing near impossible to do inside small work area of firewall.
In perfect world would like to do Expansion Valve swap with Evaporator on bench outside of car
Thank you
A diagnostic test revealed that my vaporizer reads -40F. The AC coupling
is only active for a short time (1-2 seconds) when the engine is
started. The diagnosis shows the sensor OEM 93171824 is broken. Can you help me?
tell me where the sensor is located?
Was dreading this when air con stopped working ! luckily it was a compressor – easier to fit
Super video!! thank you very much. My Saab needs a new evaporator… this was very helpful.