Purchase your own Edelbrock Performer Intake for your Pontiac V8 here:
https://amzn.to/37HTt76
Installing Edelbrock Performer Intake on a Pontiac 350 V8
3,190
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
Purchase your own Edelbrock Performer Intake for your Pontiac V8 here:
https://amzn.to/37HTt76
Comments are disabled for this post.
Wrong intake gaskets there buddy.
Several things I noticed you did that you might want to change. 1st, when you put the gaskets on the heads, be sure to put a light coat of RTV around the water ports. I also use the alignment plastic plugs that come with most of the gasket sets to hold the gasket securely in place. No need to use a screwdriver to move the gasket around. Then be sure to use RTV on the new "O" ring seal to the water pump housing. Put the intake bolts in place finger tight, then install the housing to intake bolt and tighten it to pull the intake forward before torqueing down the intake bolts. Start with the bolts in the middle of the intake and work your way out towards the ends. 40 ft lbs. works well.
Did you notice a difference with that intake manifold?