I have watched this video a few times now trying to take notes and make
sense of this but you lost me at one point, you say keep the switch off,
and if you happen to get the security feature switch it off, start your car
and switch it on. Now here is what is racking my brain since I’m trying to
actually do this on an 01 and 03, If the switch is off to begin with, the
car is now ignition locked, you’re telling us to now switch something that
was already off, to off and somehow the car will now start at which point
you flip the switch on? What am I missing here please explain. And then do
you just leave the switch alone in the “on” position on a daily bases until
you unhook the battery and need to use the switch? At which point this
video applies? Please listen carefully to your video instructions and let
me know what’s up, thanks bud.
Turn key to start wait 10-15 minutes car will beep and turn the key to off.
Take the key out (if you don’t take the key out it will not work) about 5
seconds and re insert the key turn to start wait til the beeping stops and
then turn key to start. If your secruity is really bad it will shut your
car off while your driving. (Had a previous GT) got rid of it and bought
another GT thankfully this time my car has no problems. Got it with low
mileage and im the 2nd owner.
Wow I wouldn’t do that. Haven’t had that happen to my GT and if it did
theres a procedure that can be done. I have a 2003 Impala that had that
issue same way to disable secruity for GT
Had a huge long message for you but something happened and I’m not going to
type it again but anyway, you didn’t mention that they need to have the car
running before cutting the yellow wire, otherwise they
Hey i got a 99 grand am, I just got the switch and some wires to fix it, i
got some questions about it, like douse the car have to be on when you
splice the wires? and douse it really matter if the switch is spst?
I have watched this video a few times now trying to take notes and make
sense of this but you lost me at one point, you say keep the switch off,
and if you happen to get the security feature switch it off, start your car
and switch it on. Now here is what is racking my brain since I’m trying to
actually do this on an 01 and 03, If the switch is off to begin with, the
car is now ignition locked, you’re telling us to now switch something that
was already off, to off and somehow the car will now start at which point
you flip the switch on? What am I missing here please explain. And then do
you just leave the switch alone in the “on” position on a daily bases until
you unhook the battery and need to use the switch? At which point this
video applies? Please listen carefully to your video instructions and let
me know what’s up, thanks bud.
Wat about a grand prix would it work
instead of jerry rigging a switch to start my piece of shit grand am i
think im gonna just buy a ford.
Turn key to start wait 10-15 minutes car will beep and turn the key to off.
Take the key out (if you don’t take the key out it will not work) about 5
seconds and re insert the key turn to start wait til the beeping stops and
then turn key to start. If your secruity is really bad it will shut your
car off while your driving. (Had a previous GT) got rid of it and bought
another GT thankfully this time my car has no problems. Got it with low
mileage and im the 2nd owner.
Wow I wouldn’t do that. Haven’t had that happen to my GT and if it did
theres a procedure that can be done. I have a 2003 Impala that had that
issue same way to disable secruity for GT
couldn’t we just cut the yellow cable instead? how is this working for you
so far? I am serious because I have a ga and it’s been sitting for weeks!
We’ve had the same issue for two weeks…some way we can contact each other
because I can tell you what NOT to do!!! uggg
Had a huge long message for you but something happened and I’m not going to
type it again but anyway, you didn’t mention that they need to have the car
running before cutting the yellow wire, otherwise they
Hey I need help on this grand am issue.
Hey i got a 99 grand am, I just got the switch and some wires to fix it, i
got some questions about it, like douse the car have to be on when you
splice the wires? and douse it really matter if the switch is spst?
thanks for the vid
Does this trick work if ur car doesnt start. I mean the security light has
been on for a day
Hey what if u dont have the wires in a small pouch? And there all out, and
there is 2 yellow which do u cut?