Is your engine rocking, vibrating, or making clunking noises? It’s probably time to replace your engine mounts. In this video, I’ll show you how to replace ALL three mounts on a Peugeot 508 (2.0 Diesel), but the process is very similar for many other PSA Group cars (Citroen, DS, Opel).
What’s covered in this video:
How to diagnose bad engine mounts.
Replacing the Lower Torque Rod (Rear Mount).
Replacing the Main Engine Mount (Passenger side).
Replacing the Transmission Mount (Driver side).
Step-by-step disassembly of the ECU, Battery, and Airbox for access.
Torque specs and professional tips.
Tools used:
10mm, 16mm Sockets
T40, T50 Torx Bits
Floor Jack & Wood Block
Torque Wrench (Set to 54Nm)
Replacing these mounts made a HUGE difference in ride quality—it feels like a brand-new car again!
#Peugeot508 #EngineMounts #CarRepair #DIY #PSA #MechanicTips #Maintenance
*If the video was helpful, remember to give it a “thumbs up” and consider subscribing.*
The guide is compatible with most makes and models.
')){kind=link}
Do all screws have the same torque?
Car is manual? I'm looking to change transmision mount,i have automatic gear box,look different engine mount
Hello, I have the same car, changed today the mount above motor in the left and the one under the motor, didnt change the one for transmission, as I start the car everything feels ok, when I switch from p to d I feel like a small balance on my seat, not extreme but it kinda annoys me, it is only doing that when I am standing, if I lift the foot of the brake it takes off like butter, also as I am driving no problem, can you help it? Can it be the software of the transmision?
I own the same car as you and I have a problem. The interior lights aren't working.The fuses and light bulbs have been replaced, but it's still not working. What else can I do? Thank you
Thank you a lot!
Hello from Warsaw!)
Citroen c5x7
Hello mate. Video is really on point. I have 2015 508 1.6 BlueHDI AT6, shout it be similar to yours? Appreciate your help.
One of the best DIY videos for 508…slow,methodically and so detailed..i have the courage now to service my 508..thanks man.