How to remove the ECU from a Peugeot 207 1.6 HDI Bosch EDC16C34

How to remove the ECU from a Peugeot 207 1.6 HDI Bosch EDC16C34

Here’s a short and simple guide on how to remove the ECU from a Peugeot 207. This is also fairly similar for lots of other Peugeot and Citroen Models.

Once you’ve removed the ECU you can post it to HDI Tuning for remapping, or you can program yourself using BDM100 (please see my other video).

All prices and information on our website https://www.hdi-tuning.co.uk/ecu-remapping/custom-remaps/peugeot-tuning/peugeot-207-remap/peugeot-207-tuning.html

37,632
Like
Save


Comments

Martin Gallagher says:

If we have a problem
With the power steering that's not communicating with the power steering ecu is this the ecu that's it's not communicating with thanks

Imraan Rajak says:

Hi Steve. Somebody is selling a peugeot 1.6hdi quite cheap. Problem is it does not start just Cranks. Would a faulty ecu allow it to crank even. Just asking cause had another car. Faulty ecu wouldn't even crank. Thanks.

Ladavill says:

bemutattal egy ecu cseret, hogy ez mekkora segitseg te vereb

Fara Ahmed says:

Hey my 1.4 petrol 207 is suspected to have an ECU fault is it the same as this to take it out and get a new one programmed?

-- says:

HOW TO RESET THE VANOS ADAPTATIONS FROM THAT ECU WITHOUT ANY SPECIAL SCAN TOOL THAT COSTS FUCKING THOUSANDS?

Lenn Al says:

Hi Steven.
On an 3008 mk1 , when replacing the steering lock and key do you need to replace the ecu from the same car as the keys to start the engine?

Eugene Endelinch says:

Hi steve i need help please im looking for a ecu for my Peugeot 207 1.4hdi 8 vavle

Charlotte Jarvis says:

Hi Steve, was going to change the fuel filter on my Peugeot 207 2008 1.4 hdi. For this you have to swing the filter to the right, but the ecu is in the way, lifted the ecu out but managed to short circuit this against the positive side of the battery. Unfortunately the car will now not turn over, have all ignition lights, checked all fuses, non seem to be blown, have I blown the ecu unit? What will it take to get this car running again?

Shahidur Rahman says:

Hi Steve can let me know how much is a remapping ecu for a 207

Dani Bee says:

Hi Steve thats awesome!
what is required to run the engine once the Immobilzer is removed??I want to run the engine in a boat.Do you think thats possible if I sent in my ECU for imobolizer removal?

SydneySerb The traveller says:

I have a Peugeot 207 2012 model. When I turn on the aircon my car goes into limp mode. Can anyone say what could be wrong. Without aircon car goes good. Once I turn aircon on it goes into limp mode and a orange light turns on the dash

MrDustr says:

Hello. I have a enginelight on the car. And warning text: Pollution fault. Problem, broken/fault ecu?? Can i take out my broken ecu. Buy a used ecu on ebay and just plugg it in? Or can the problem be fixt? Or do i have to get the car to a mechanic after i put the "new" ecu in? Thanks 4 the help. 🙂

AAA says:

Hi Steve,
I’m from Sydney Australia would like to more information on this cause I would like to get my Peugeot 207 gti ecu done. Any best way I can’t contact you. Thank you

AerialAsturias says:

I would love to learn tuning, I know that people often keep their info. but I would like to know if you could give me any advice to start. should I start on my own? or go to a course? thanks!

muscle says:

would be wonderful if you can zoom in during removal.

Comments are disabled for this post.