The staff at NissanVersa.org show how to remove the headlamp assemblies and replace them. A set of Tiida Xenon Projector lamps from Versaspeed.com are assemb…
The staff at NissanVersa.org show how to remove the headlamp assemblies and replace them. A set of Tiida Xenon Projector lamps from Versaspeed.com are assemb…
You must be logged in to post a comment.
){kind=link}
I have checked a little bit the other day, except for the bumper, all
screws are perfectly attached. The bumper doesn’t stick to the right place
either(on the wheel side), and the has a small gap between lamp and bumper.
Is there any screws I missed? or anything that can possible causing them to
split from each other? Thanks in advance.
Hi, I recently hit my car when parking. My headlamp is not staying at the
right position. No matter how hard I pushed, I just can’t get it back to
the place it is supposed to be, is there any solution for this? Thanks in
advance.
Thank you so much for the help! I just sent you a message on youtube!
Did you break anything when you hit the car?
There shouldn’t be a gap between the headlight housing and the bumper (or
very little at all). Can you upload a video or picture? I haven’t taken a
Versa apart in a couple years, so I don’t rememebr how many screws there
are. I remember 3.
check out Versaspeed for the headlights. They are ~$1400 per set as they
have to come from Japan.
@keanorampersad You’ll probably have to contact Versaspeed directly. He has
to get them specially ordered from Japan and doesn’t keep them in stock.
There may be one set in the US available if Nissan Motorsports has them in
their warehouse. They ordered a set a couple years ago for a project car,
but I don’t think they used them on it.
@saabdriver2008 I sold the headlights last year. I only have the 2009 front
Grille left in the garage.
were would i be able to find those tiida headlights? and how much do they
cost?
I currently live in Mississippi. I actually changed the whole housing out
for the Tiida Bi-Xenon headlights. I had to wire the plugs correctly though.
HOW CAN I CHANGE JUST THE HEADLIGHT. FOR NISSAN VERSA.
nice man keep going
Can I buy ur passenger stock headlight. I cracked mine.
hey man, my name is eris and i also own a 07 nissan versa and i got a set
of halo projector headlights for my car on ebay, i got them shipped for
about 400$ with duty charges added. check them out, i have a few vids in my
channel of my car and all my mods.
To change the bulbs, you’re correct. You don’t need to remove everything.
If you’re too busy to watch the video and see that I changed the whole
headlight assembly to the JDM Bi-Xenon setup, it’s OK.
So where are you located, and did you modify the shield in the projector
housings the change the orientation of the cutoff?
you don’t have to remove the tires just turn them to get to the clips
behind them
yo where can i buy the projector headlights ?? not seeing them on the
website u said
Headlight housing (like I did), or the bulb?
This guys is totally wrong, you dont need remove everything for change the
headlights, just unplug, take off the rubber, move the clips behind of them
and that it. easy and fast