How to Replace Engine Torque Strut Mount 2007-2012 Nissan Altima 2.5L I4

How to Replace Engine Torque Strut Mount 2007-2012 Nissan Altima 2.5L I4

Buy Now!
New Engine Torque Strut Mount from 1AAuto.com https://trq.video/ib-1AEMT00294

This video shows you how to install a new torque strut engine mount on your 2007-2012 Nissan Altima 2.5L I4. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You’ll know it’s time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating.

Estimated installation time for a professional technician is approximately: 30 minutes

This repair was done on a 2008 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obXt-1AXAA00013
• Pry Bar https://trq.video/oajh-1AXAA00020
• 18mm Crowfoot Wrench
• 13mm Socket https://trq.video/oczW-1AXAA00015
• 18mm Socket
• Ratchet https://trq.video/ocz5-1AXAA00016
• Torque Wrench https://trq.video/obBp-1AXAA00044
• Block of Wood
• Bungee Cord
• Gloves https://trq.video/obPH-1AXSS00048
• Safety Glasses
• 5mm Hex Wrench
• Floor Jack https://trq.video/oaTD-1AXAA00068
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

585
Like
Save


Comments

@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

Comments are disabled for this post.