Car Fix DIY Videos

https://www.1aauto.com/2002-06-nissan-altima-cv-axle-shaft/i/1aacv00214?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=Z3YGZBi1c-0
1A Auto shows you how to repair, install, fix, change or replace broken, worn, or vibrating CV axles. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.

✔ List of Auto Parts from 1AAuto.com Related to This Repair:

1AACS00151
1AACV00214
1AACV00215

🔨 List of Tools Used in this 1AAuto.com How-To Video:

• Pry Bar
• 22mm Wrench
• 21mm Socket
• 22mm Socket
• 32mm Socket
• Ball Joint Press
• Dead Blow Hammer
• Needle nose pliers
• Side Cutters
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Cloth Rags
• Paper Towels
• Rust Penetrant
• Drain Pan
• Floor Jack
• Jack Stands
• Rubber Mallet

🔧 Instructions:

1. Removing the Wheel 0:25
2. Removing the Axle 1:17
3. Installing the Axle 7:54
4. Installing the Wheel 11:37

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.