How to Install Fog Light Kit 2013-2020 Nissan Pathfinder

How to Install Fog Light Kit 2013-2020 Nissan Pathfinder

Buy Now!
New Fog Light Kit from 1AAuto.com http://1aau.to/ib/1ALFZ00089

This video shows you how to install a fog light kit from TRQ on your 2013-2020 Nissan Pathfinder.

This process should be similar on the following vehicles:
2013 Nissan Pathfinder
2014 Nissan Pathfinder
2015 Nissan Pathfinder
2016 Nissan Pathfinder
2017 Nissan Pathfinder
2018 Nissan Pathfinder
2019 Nissan Pathfinder
2020 Nissan Pathfinder

Tools you will need:
• Phillips Bit in a Ratchet
• Phillips Head Screwdriver http://1aau.to/obwn/1AXAA00013
• 10mm Socket http://1aau.to/obrt/1AXAA00017
• 7mm Socket http://1aau.to/obrt/1AXAA00017
• Trim Tool Set http://1aau.to/oama/1AXXX00006
• Crimper
• Wire Cutters
• T20 Socket
• Ratchet http://1aau.to/obRt/1AXAA00016
• Socket Extensions http://1aau.to/obMX/1AXAA00015
• Coat Hanger
• Dielectric Grease
• Electrical Tape
• Gloves http://1aau.to/oaAT/1AXSS00048
• Safety Glasses
• Silicone Paste
• Wire Butt Connectors
• Wire Ties
• Wire Brush http://1aau.to/ovR/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

136
Like
Save


Comments

@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

Comments are disabled for this post.