This video is to show you how to take apart your trim around your radio to install a new headunit or to change the lights in your A/C display.
Disassembling the radio trim on 98-01 Nissan Altima.
107
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Guys, I got ’98 model and it didnt come off like his. Mine had the lower
piece attatched to it because you unscrew it once you take it off. So it
might be harder to take out with the lower piece still attached to it but
you take it off like that anyways just be very carefull and give it a good
hard tug.
Nikka u sukk.
thank you :)
THANK YOU
thank you
Thank you, i did the same with my nissan altima 1993
What’s the pad thing at 4:25 my car doesn’t have one.
#CarRadio #NissanAltima2000
@Kyle Huff yea I had to get the additional mounting kit to replace the
factory radio. I got it at Best Buy
@youalldoit your welcome man
I took everything out, but I couldn’t get my stereo out. Can you make a
video on how to replace the radio in a Nissan Altima with an aftermarket
radio? Thanks… 🙂
question: i just got a kenwood kdc 152 for this car that im installing in
the morning. Do I remove the screws by the AC to get the radio out?
So I was trying to instal my stereo and I got all the screws out except for
the one on the drivers side near the bottom. It will not come out, I’ve
tried WD40, going to an auto parts store, screw extractor, vise grips for
the head, everything and it still will not come out. What can I do to get
this out because it’s the only thing holding the trim piece in place and
I’m so sick of trying and getting nowhere
@zabdi786 There should be screws holding your radio in. If u take those out
with a hard yank it should come out. I got a new car so I can’t take
another vid sorry
@duke53y no I don’t because that’s not the body style I had. I imagine it
would be the same process tho. Take off the door panel which should be one
big piece and you will have access to the speaker
Good information. You need a power driver. You turn that screwdriver sooooo
slow for a guru. lol.
thus really was a very helpful video. i have a 2001 nissan altima gxe. and
it looks just like the inside of yours, thanks for the help bro
thank you
thanks very helpful
You shouldn’t need to remove any screws on the actual HVAC unit just the
four screws holding in your stereo now and the old one should come right
out. If not then you can try removing the screws to the HVAC unit but like
I said I don’t believe it will be necessary.
hey man thank, very helpful, hey so where did you get the bracket to hold
aftermarket stereo? i need one
what installation kit did you use?
nice video man did you have to install a new mounting kit for the
aftermarket radio?
wtf i have a 97 altima and the only thing keeping me from putting my new
stereo in is this retarded cigarette lighter. fml. mine isn’t a plug.
Awesome video!! Exactly what I needed. Thanks! I just bought a 98 Altima
for $1100 with 132k miles on so Its a few small things I need to fix. If
you know of any cheap places I can go to upgrade my car please let me know.
thanks this helped a lot
If you’re going to work on electronics, shouldn’t you disconnect your
battery? Also, that’s not the air conditioning unit. that’s the air
conditioning CONTROL unit.
thanks , very helpful
Thanks so much!
My ashtray keeps getting stuck and prevents me from pulling out the trim
fully. 🙁
@wacoodude The dash conversion kit was by scoche or something like that. I
don’t believe 6.5 is the right size for the front. The ones I put in my
front door were 5.5
You rock. Thanks for making this video.
Hey man I installed my headunit and all was working well however, there is
a finger sized gap in between the bottom of my dash kit to right above the
cigeratte lighter. Any suggestions? Or do you remember what dash kit you
used?
Do u know how too install front speakers in a 95 Nissan altima. And how
what size.