http://www.apdty.com/ Click the above link to find the Window Motor for your vehicle. In this video we’ll show you how to replace your old window motor with …
http://www.apdty.com/ Click the above link to find the Window Motor for your vehicle. In this video we’ll show you how to replace your old window motor with …
You must be logged in to post a comment.
What if the motor is broken with the window down all the way, how can I get
it to come up enough to unbolt the regulator.
helpful , thanks
Will it be the same process for the rear windows please let me know ASAP :D
The plastic clips that are glued to the window broke. Do you know where I
can buy some online?
Thank You Soo Much!!! Took me about an Hour and saved me 400 bucks.. Love
the videos!!
Awsome video ….learned something new today. ..thanks again.
hi I wonder if you can show me the wiring of the passenger door window
switch for a Nissan armada 2004 or if any body in here has a Nissan armada,
pathfinder or titan that can show me some pics of the wiring of the
passenger window switch thanks
Great Videos!!! Thanks!
thank you! Tremendous job!
thank you so much you video help a lot
APDTY – THANK YOU SOOOO VERY MUCH!!!!!!!!! I JUST REPLACED MY WINDOW MOTOR
ON MY 2007 NISSAN ARMADA AND I DID IT WATCHING THIS VIDEO. I CANNOT BELIEVE
HOW EASY YOU MADE MY JOB. I’VE BEEN STRESSING OUT ALL WEEK FOR NOTHING
THANKS TO YOU. THANK YOU VERY MUCH….
Hello there! I was going nuts thinking of the cost of doing this
repair…..you made it simple and very economical (saved $200) in shop
fees. Many thanks
@APDTY Yes it’s a EX titan base model. When I bought it they were already
installed
@a1hocker If they are only getting stuck when raising both at the same
time, and then begin working again after a little while, I would suspect
that the problem is the thermal circuit breaker (I am somewhat guessing
because I am not familiar with aftermarket windows). When rolling both
windows up at the same time, it puts a huge current load on the circuit
breaker, which could cause it to pop open, the windows won’t work until it
cools down and resets itself. You might need a higher amp breaker
Much thanks…. I am half way through and now awaiting my motor to
arrive… I have put this off for over 6 months…. I can’t believe I
waited this long, your instructions made it easy. Thank you again!
APDTY- THANK YOU!!!!! HOWEVER, MY WINDOW IS ALL THE WAY DOWN SO I DON’T
KNOW HOW I WILL REMOVE THE REGULATOR SINCE ITS GOTTA BE HALF WAY UP TO
REMOVE THOSE TWO BOLTS. PLEASE HELP!!
It sounds like a sign the motor itself is going bad and binding when moving
in the up position, this truck had a similar issue.
you forgot that window wiper part but good job anyway
How can I test to see if is the switch, regulator or motor? Whenever I push
the switch, I just hear a click and nothing happens, the window is all
stuck down. Please help me diagnose the problem.. Thank You!!
My driver side window has been dragging whenever I put the window up, just
yesterday it quit on me.. the window will go up about 4 inches and then
drop on its own.. where might my problem be? I would really appreciate your
help
I have after market power windows on my titan and they get stuck if I raise
both front windows at the same time. Is this a way that I can fix that
problem or is it simply cheap after market parts?
@APDTY My driver side window motor just quit on me. I guess I’ll be using
this video after all.
@a1hocker Is it a conversion kit from manual windows to power windows?
thanks you for the video,, very helpful . help me save money on labor