So I just did this, and a tip that I have is, if that little black piece
that holds the bulb in, does NOT come out then grab the bulb housing from
below and just pull. The bulb and fixture will just pop right out. Then you
can grab the bulb and replace it easier. Thanks for this informative video.
Thanks for making and posting this video. I would have struggled to find
the way in. Getting inside the console was pretty easy but I had a little
problem getting to, and actually replacing, the bulb. In my case, the bulb
socket popped out of the bottom side of the inner black plastic section
(seen at around 7:08) as soon as I started to pull up on the silver plastic
piece. Getting it back in there was a struggle though because the wires are
very short. Anyway, Thanks!
So I just did this, and a tip that I have is, if that little black piece
that holds the bulb in, does NOT come out then grab the bulb housing from
below and just pull. The bulb and fixture will just pop right out. Then you
can grab the bulb and replace it easier. Thanks for this informative video.
Gotta love the Internet! Thank you for posting this. I’m about to change
this on my Fiance’s car. Thanks for making a very easy step by step video!!
Wow. Nice presentation.
Thanks! Hope the video helped you out.
Thank u !
thanx for vid!!! been wondering how do this for while…got half way & gave
up….. 😛 hope leds can replace 194 bulb…
Thanks for making and posting this video. I would have struggled to find
the way in. Getting inside the console was pretty easy but I had a little
problem getting to, and actually replacing, the bulb. In my case, the bulb
socket popped out of the bottom side of the inner black plastic section
(seen at around 7:08) as soon as I started to pull up on the silver plastic
piece. Getting it back in there was a struggle though because the wires are
very short. Anyway, Thanks!