➢Store: https://www.benkispec.com
MaXpeedingRods Turbo: https://bit.ly/3YyJfOD
COUPON: RexH
save 10%
Intercooler: https://bit.ly/3Yvh6Ig
Piping: https://bit.ly/3ImGk5V
➢Instagram @rex_hyt https://www.instagram.com/rex_hyt/
➢ BUSINESS ENQUIRES: rextonLHYT@gmail.com
➢Discord: https://discord.gg/U9Rpp2FcEf
TI PERFORMANCE: https://www.tiperformance.com.au/
DISCOUNT ON TOOLS – REX10 For 10% OFF: https://garagetools.com.au/
⬇ My Postal Address ⬇ 💌📫
P.O. Box 2178 Brighton North 3186, Australia, Victoria
){kind=link}
isnt a bad idea to have a really hot turbo next to your radiator? How do you protect it?
You need Mike "TURBO" Lake over to give you a Hand
inshalla ollie gets better
Pipe to pipe with bov no intercooler.
yo cuzzy for radiator advice i just used the stocker, and ran two 12" spal push fans wired to the stock relay circut mounted on the front of the rad, stays nice and cool
if you got AC i'd say fvck it off before you get too deep in as a phat downpipe (esp one the size ur running) won't fit where the pulley is, i had to remove all that shit – but who needs ac anyway amirite?
9psi would be a max safe limit with stock rods, mines happily chugging along at 7psi already put 2k kms on it, 4g64 or 4g93 injectors would be a nice fit of that turbo, 4g64 injectors the stock ecu struggles to control with reflash, a bit too big for the 25 year old ecu to handle, had to roll with stock 4g93 injectors, but it still runs really rich down low
i ran the stock pump, tried to fit a walboro 255 but it just fouls on the bottom of the tank, so u can smash the bottom of the tank or do what i did and run a brand new bosch replacement 80lph pump, seems to be cutting the mustard so far, with no issues at all fuel wise
Would not go over 10 psi Boost on stock non forged internals unless you want it to end in tears !!
Max peeding rods are Chinese rubbish junk products!!!
Why bother with crap !!
Where are you gonna put the fans
T28's sound sooo good
If there's any chance this ends up being dailyed, don't delete the ac
TURBO IS TASTY
Try look up 4g15 turbo settup
Get well soon meknik! We love u bro ❤️
Could you have flipped the stock mani and cut and welded on new flange?
Make a bracket for the turbo to the block or else you will crack the manifold.
For your power steering clearance issues. Delete the original power steering pump and install an Holden astra electric steering pump
Bro that Tarana is mint
Best budget lancer build on youtube
NekMick haha
Fairlane front end? Hmm
get well soon Ollie ❤
Man you need some proper tables / benches to work on
Make Turbo Lancer stickers please
Lancer+T yeah buddy
No guard on the grinder for full spec
long live rex
Just installed a pod filter on my vs commodore and holy v6 throttle body noise all the way and so easy to install for a big car
love to see local car people love the video