This video explains the DM Board Repair procedure and mainly has to do with Mitsubishi Rear Projection TV’s. The common symptom is the infamous “continuous b…
Mitsubishi Rear Projection TV WS-65869 (#1) Continuous Blink – Won’t turn on
27
Like
Save
 Continuous Blink – Won’t turn on')){kind=link}
- Tags:
Blink, Continuous, Mitsubishi, Projection, Rear, Turn, Won't, WS65869
- Categories: Mitsubishi
Comments
Write a comment
You must be logged in to post a comment.
Does this method also applies to the circuit board for the Mitsubishi
Laservue? I’m on my third circuit board replacement, and my warranty is
expired. Now I’m starting to get random tv shut offs again 5 months later.
Thanks
Yup, just had to do this again to my 65869 last week after the breaker for
that circuit tripped (vacuum cleaner). About 4.89 for the 7 caps needed.
It very likely would. And the parts are not that expensive so if it didn’t
work, you won’t have lost much money.
i have a Mitsubishi WD-73833 and the timer light continuously blinks green
and the tv wont turn on . it this model problem the same fix as the
ws-65869 ?
Hi Sean i need your help!! i opened up my tv to vaccum the dust
accumulated. after i put it back together the green light on the front
panel keeps on blinking. there is a blue button under the DDI sheet metal
cover that i may have pushed it. Did i just wipe out some programming or
something??
I have a Mitsibishi wd73734 I replaced my bulb about 6 months ago but it
just blew again, I replaced it with a bulp I bought at Amazon (made in
china and that blew after 2 days, my fans are working no dust.what are the
best bulbs to buy, any help would be great
Thank you so much for taking the time to make this video. We will give all
of your suggestions a shot in hopes of fixing our WS-6569.
is it possible for the caps to go out without blowing the tops?
would this repair work with my Mitsubishi ws-55511. Which has the
continuous blink problem with no error code. Was on before a 15 minute
power-outage and then the timer/power led just kept blinking and has kept
blinking for about two weeks now. There are no repair people willing to
even look at the tv. So I’m in-charge of fixing it.
I have it all hooked up except for PF coming out of the DM board does that
hook up to RG its the only one left. Thanks
For exact part numbers and further detailed info,email contact
vistaelectronics@att.net
I have a WS-65807 and I get no blinking light at all yet it won’t power on.
What do you think is wrong? I have uploaded videos of what the TV is doing
if you want to look.
Hi, if you guys are not good at soldering or testing components or don’t
know , you can send your little dm power board to this guy on ebay and save
your tv, type this # in ebay’s search bar:330700000004. They are
professional and do a good job,don’t mess up your board.
And where can I get the compa setters, any body.
E2P board is NLA from Mitsubishi. But now Mitsubishi is offering eeprom
kits which contain 3 upgraded eeproms ics. But will have to be replaced on
a component level on the E2P board
Hi, If you guys feel like not good at soldering or using tester to check
components, just buy this repair service from ebay for this board, search
in eBay engine for item #330700000004.
I have E2P boards……do you still have a need?
I have a WS-55515 Model…same problem.. Continuous blinking light and wont
turn on. Can i fix this problem the same way as this? I opened the back and
dont see the same DM as on here. Please help. I dont want to buy a NEW TV
unless repairing it will cost just as much as buying a new one. Thank you
for your time. Your help will be well appreciated.
hey my tv works, it turns on it works fine but when i turn it off it stays
blinking for ever, i have to unplug it and then it stops?
I’d like to thank you for posting this! My TV did had this problem. I
ordered the 7 capacitors plus 2 just in case from Amazon with shipping for
$17.90. I took the box over to my Dad’s and my 11 year old daughter
soldered in the capacitors. She had just worked on a project with my dad
learning to solder coincidentally! I took it home and put it back together
and VOILA! It flashed at first but then I turned it right on! It worked
like a charm! We are thrilled! Thanks so much! Suzy
or u could buy a whole new DM mitubishi board for 50 buck of ebay :)))
FFFFFFFFFFFUUUUUUUUUUUUUUUUUUCCCCCCCCCCCCCCCCKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK