How to replace rear suspension (struts/springs) on 95 Mitsubishi Eclipse

How to replace rear suspension (struts/springs) on 95 Mitsubishi Eclipse

How to replace struts and springs on 1995 Mitsubishi Eclipse GS. I also lowered the car with JDM 1.5″ lowering springs and Lotek sport struts from ebay. Tools list and detailed diagrams included, along with the issues we ran into.

Heading West by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

10,227
Like
Save


Comments

Tim Fanslau says:

How well have those Ebay shocks held up?

AD Glz says:

I have a 99 eclipse. I want to lower my rear. I want my fender barely above my tire but will my tire hit my camber ???

Mr. Lauzon says:

It is recommended to avoid air wrench to tight the top nut as it could potentialy damage the inner shock absorber shaft, it is also recommended to use two wrench to tight them up. If it's for the competition, make sure to check the according factory book for the tighten energy which was 16 ft.lbs here and that both side have same height before reinstalling.

Steve B says:

Thanks! Very helpful.

Comments are disabled for this post.