I couldn’t find a decent video showing how to replace an inside door handle on a Fusion. Apparently these things break a lot. It’s not a hard fix. Watch and …
I couldn’t find a decent video showing how to replace an inside door handle on a Fusion. Apparently these things break a lot. It’s not a hard fix. Watch and …
You must be logged in to post a comment.
Yup. I replaced 3 handles today. This definitely helped me out. Thanks!
Thanks a bunch for a clear and real video. I’m going at it today with two
handles.
This was so helpful, thanks for putting this up!
thank you for the video… im not going to buy a fusion now and instead a
Ford Focus
thanks a lot, u saved me some $$$!
Done! Took a whopping 30 minutes with your great instructions. Part was
about $35. Dealer wanted $80 for part alone. Dealer wanted $190 to do he
job. Big thanks!
Thanks for taking the time to make this video. Had this problem today.
Thanks for this, makes life so much easier.
Awesome video. Snapped mine this morning. Seeing you fix it will make my
job easier
Works on the 010 fusion as taped. Only suggestion is use a magnified
torque driver to remove the screw behind the door handle, easy to drop.
Thanks for the vid saved me hundreds,seemed intimidating u mad it easy
thanks again
Thank u so much. It took me just 30 mins to replace it. Guys this is so
easy. If u dont figure out, u are nerd . The handle cost me like 34 bucks
in ebay with shipping included. What else u want. Great done.
Thank you so much fell like a dumb as rolling my window down to get out lol
fu××in handles
thanks duuude, your tutorial video was a great help, you held that camera
very steady, you were as detailed as can be without being over detailed,
and that little work around on how to open the door from the inside was a
tremendous plus for me, many thanks
Yay! My new project to start! Driver door handle broke today. Guess I’ll be
channeling my inner-Lester later this week when I get the part. Apparently
this is a common issue for this model, but knock on wood, this is the only
“major” repair I’ve had to do to the car in the past two and half years
(and 85,000 miles).
Awesome video! I’m doing mine this weekend. Thanks!!!
Thank you very much, this was far more helpful than other similar videos.
Hope it went well.
Thank you so much… I just received my new handle this morning, installing
today.
Thanks bro got the job done
Just broke my handle on my fusion just what i needed to see. Thanks for the
great video
This video worked! Thank you!
Thank you SO much! I’ll be changing my best friend’s out soon. He’s so
helpless with cars!
Thank you for the video! It was very helpful. I bought the upholstery tool
and it helped immensely. With all the right tools (7mm socket wrench, star
drill bit, upholstery tool & screwdriver) I was able to complete the
replacement in 25 min. You video was the most important tool though!! thank
you very much, my three year old played it over and over for me while I did
the work.
Great how to video! I feel a lot better about being able to fix mine now!
Thanks a bunch for this video, handle broke a couple of days ago and it’s
good to see it’s pretty simple to fix.
Nice video, of course some of the bolts on the door were changed to “hex”
head screws but still got it changed asap because of this video!!! Thanks,
labor at dealer here is $140/hr tax included!!!
i will be doing this to my 2007 mercury milan THANKS!!!
I am literally about to go and do this. This is so helpful thank you!
Hopefully I get the same results.
A note on model year differences, the 2006 through 2009s use a two-piece
door clip (which you see here) and they are quite fragile, easily losing
support. Frankly they suck. Luckily the 2010-2012 models use a single-piece
that is far superior.
Thanks a lot. Taking on this project tomorrow.
Thanks!!!
Great video…thanks alot…ill be doing this as soon as the part comes in!!
Thanks a lot!!!