http://www.1aauto.com/1A/DoorLockActuators/Mercury/GrandMarquis/1ADLA00018 1A Auto shows you how to repair, install, fix, change or replace a broken or snapp…
http://www.1aauto.com/1A/DoorLockActuators/Mercury/GrandMarquis/1ADLA00018 1A Auto shows you how to repair, install, fix, change or replace a broken or snapp…
You must be logged in to post a comment.
You may want to take the door panel off and see if you can pop the door open from the inside of the door. You may also fing that something has broke which is why the door will not open. 1aauto.com 888-844-3393
I have a issue similar to this…the latch that’s in the center of the door is frozen so I can’t open the door…what do I do
It may be an issue with the key pad itself. You may want to ask the dealer to see if the replacement one would need to be re-coded.
i recently purchased a used 1999 grand marquis. the keyless entry pad on the driver side door has 2 keys that do not function. the 3/4 and 5/6 buttons do not work. could this be a fuse that needs to be replaced? if i get a replacement keypad will i need a new code to enter my car?
It may be very similar.
Is it the same for replacing the DL Actuator in a 2003 Crown vic?
Very useful; however, I replaced mine WITHOUT removing the rivet that attaches the actuator bracket to the door. It was a little challenging spreading the tabs and getting the actuator out and even harder getting the new actuator back in BUT I didn’t have to fuss with removing the factory rivet.